Roadblock tire breaker Remote control roadblock tire puncture device

Fully automatic remote control tire breaker* Model Fully automatic remote control tire breaker* Specifications
Fully automatic remote control tire breaker* Weight
Fully automatic remote control tire breaker* Weight bearing
Fully automatic remote control tire breaker *Speed/(Grade pavement)
The new type of remote-controlled automatic/manual dual-purpose portable traffic blocking nail is a new generation of roadblock developed by our company after studying the latest domestic and foreign traffic blocking technology. It adopts an electromechanical integrated remote control device and is light in weight. It is easy to carry, easy to operate, safe and reliable. It can set up cards at any time and deploy mobile defenses without affecting the smooth flow of normal roads. It is an indispensable advanced equipment for law enforcement departments such as public security, armed police and public security who need to set up cards to intercept suspect vehicles.
The main body of the roadblock is made of high-strength alloy aluminum, the spikes are made of alloy steel, the outer casing is made of engineering plastics, and the power supply uses a new lithium-ion battery, which ensures the roadblock's service life and superior electrical performance.
The execution standard performance complies with the "Puncture and Deflation Roadblock" standard of the public security industry of the People's Republic of China, and has an inspection report from the Special Police Equipment Quality Supervision and Inspection Center of the Ministry of Public Security.
Instructions for use
Place the equipment box wheel facing downwards on the road surface and the traction device. Open the locks on both sides in the unfolding direction and turn on the power switch of the traction device (the red button lights up to indicate standby mode).
. Pull out the remote control antenna and press the forward button (up button) to expand the nail strip to the required length and release the button to stop.
. When folding, press the back button (down button) to close the nail strip and release it. Press the button to stop.
(Note that the remote control has a delay function, so master the advance amount during operation, otherwise it will cause damage due to strong inertia impact on the box)
When collecting the box, connect the traction device and the nail tape box Match the interfaces accordingly, then raise the box and press the locks on both sides.
Please choose a flat road surface when laying out.
When remote operation cannot be performed due to electromechanical failure, you can hold the traction device to pull the nails along Pull it out and complete the layout manually.
5. Precautions (please read carefully before use)
Because the nails are sharp, be careful to avoid injury during operation and maintenance.
When laying out, the area around the nail belt must be There are dedicated personnel on duty to avoid accidental injuries to pedestrians and vehicles.
During the interception, it is strictly prohibited for any person to appear within 1 meter of the inertia direction of the intercepted vehicle and the spike belt to avoid personal injury caused by the vehicle losing control after a tire puncture and other reasons.
When the equipment is idle for a long time, it needs to be charged once every day (the LCD voltmeter is lower than the value, and the power switch needs to be turned off immediately after use.
It is strictly prohibited to drop the equipment maliciously or hit the equipment box hard.
This product is electromechanical Please pay attention to waterproof, moisture-proof and sun-proof products during use and storage.
When reinstalling the nail, be sure to place the rubber ring on the top of the nail shaft (nail base) first, otherwise the nail will fall off easily.< br/> Company name Shanghai Erren Industrial Co., Ltd.
Contact person Qiao Hao
Telephone
Mobile phone
Email@
Factory address No. Shenglong Road, Jiuting Town, Songjiang, Shanghai