German Ibro MSK04 limit switch

The performance of YBORO actuator
, the rated output force or torque of the pneumatic device should comply with the regulations of / and /
The above is a diaphragm actuator
The above is a diaphragm actuator
Under no-load conditions, input the air pressure specified in the "Table" into the cylinder, and its movement should be smooth without jamming or crawling.
Under the air pressure, the output torque or thrust in the opening and closing directions of the pneumatic device should not be less than the value indicated on the plate of the pneumatic device, and the movement should be flexible, and no permanent deformation of any part is allowed. and other abnormal phenomena.
When the maximum working pressure is used for the sealing test, the amount of air leaking from each back pressure side is not allowed to exceed (+/(standard state)). The amount of air leaking from the end cover and output shaft is not allowed. Exceed (+/.
, Strength test is carried out with times the maximum working pressure. After maintaining the test pressure, leakage and structural deformation are not allowed in the cylinder end cover and static sealing parts.
, Action Life times, the pneumatic device simulates the action of a pneumatic valve. While maintaining the output torque or thrust capability in both directions, the number of opening and closing operations should not be less than times (the opening and closing cycle is one).
For pneumatic devices with a buffer mechanism, no impact is allowed when the piston moves to the end position of the stroke.
German Ibro limit switch, electric head
German limit switch
German limit switch Position switch
German limit switch
German electric actuator
German electric actuator