Cold press hydraulic cold press model manufacturer

Cold press hydraulic cold press model manufacturer


Hydraulic cold press The cold press is used to cold press and bond furniture panels. As well as leveling and shaping. For wooden doors and various panels, its lamination quality is good, fast, and efficient. It is widely used in furniture manufacturers, door manufacturers, decorative panels and other panel production industries.
This machine tool is mainly composed of hydraulic system, electrical control system, pressure plate balancing mechanism, pressure plate and fuselage.
, The hydraulic system consists of an oil cylinder, an oil tank, an oil pump, an oil pump motor, a control valve block and a pressure gauge. There is oil in the oil tank. The oil pump motor drives the oil pump to pump oil. The oil is sent to the oil cylinder through the connecting oil pipe to make the oil cylinder work. Among them, the relief valve controls the maximum pressure of the hydraulic system and functions as a safety valve to prevent the system from being overloaded. The one-way throttle valve can cause the pressure parts to generate back pressure during the extrusion process and plays a stabilizing role. The solenoid ball valve is used to maintain the system. The set pressure, the pressure gauge is used to display the pressure.
. The electrical control system mainly consists of a main circuit and a control circuit. Automatic circuit breakers, fuses, and AC contactors are used in the circuit to protect machine tool motors, solenoid valves, etc. from overload, short circuit, voltage loss, and undervoltage.
. The pressure plate balancing mechanism is mainly composed of a balancing lifting rack, a lifting gear, a rotating shaft, and a fixed rotating bearing. Two balance racks on the left and right are installed on the fuselage. Lifting gears are fixed on both ends of the rotating shaft. Bearings are installed on both ends of the rotating shaft so that the rotating shaft can rotate flexibly. When the pressure plate rises and falls, the lifting gear meshes and rotates with the balance rack, so that the pressure plate always maintains balance during the lifting process.
The pressure plate consists of an upper pressure plate and a lower pressure plate. The upper and lower pressure plates are welded by profiles and steel plates, and the working planes are precision machined by large gantry milling machines to ensure that the working planes are flat and smooth. The upper pressure plate is connected to the cylinder rod of the oil cylinder, and the lifting and lowering of the pressure plate is realized by the lifting and lowering of the oil cylinder. The lower pressure plate is welded directly to the fuselage base. The entire machine structure is tightened.
The fuselage is welded from profiles and plate steel, with compact structure and good strength
Technical parameters of woodworking cold press
Pressing plate size
Maximum pressure
Large quantity and pressure plate thickness
Installation power
Pressure plate height