Guangdong Xianglong manufacturer rushes to buy gypsum board fireproof partition keel

Partition wall light steel keels are thin-walled steel produced using high-quality cold-rolled continuous hot-dip galvanized coils as raw materials and cold-bending technology. standard.
, Product Features
Made of high-quality cold-rolled continuous hot-dip galvanized coils as raw materials, the material is uniform, high strength and good stiffness, ensuring excellent construction performance of light steel keels, double-sided galvanizing amount/㎡ , higher than the national requirements for high-quality products, with strong anti-rust and corrosion resistance, using multi-roller production technology to ensure gradual deformation of the steel strip, sufficient release of main stress, uniform distribution of residual stress, and effective prevention of cracking of ceiling gypsum board joints
The fully automatic production line and servo technology for light steel keels of any cross-section ensure product dimensional accuracy and good nail penetration when installing gypsum boards, saving time in construction. The variety is complete, covering all types on the market, and can be customized and produced according to customers' special requirements.
>Light steel keel
The partition wall is a permanent wall. It is composed of light steel keel as the skeleton and paper-faced gypsum board as the base material. The surface can be painted with latex paint, wallpaper, In the home decoration process, this wall material is often used when adjusting and designing the space layout, such as the division of large indoor spaces, the modification and displacement of non-load-bearing walls, duplex residents Covering stairs, etc.
Light steel keel partition walls have the advantages of light weight, safety and reliability, strong impact resistance, non-toxic and non-combustible. They occupy small indoor space and are easier and faster to construct than other permanent wall materials. At the same time, it has good sound insulation, heat insulation, anti-corrosion and anti-frog properties, and can be used in any part of the home, including kitchen and bathroom partitions. In order to meet the requirements of special environments, it can also be used for high-level sound insulation and heat insulation. Therefore, /_light steel keel
partition wall is an ideal wall material.
>Installation Instructions
The first step is to lay out the light partition wall, install the door opening frame, install the top keel and the ground keel, install the vertical keel in stages, install the vertical keel, install the horizontal keel clips, install the gypsum cover panel construction The joints are constructed with surface layer.
The second step is to lay out the lines according to the design and construction drawings. On the prepared ground or floor pillow belt, lay out the position lines of the partition walls, the frame lines of the door and window openings, and place the edge lines of the top keels.
The third step is to install the door opening frame and then install the door opening frame of the partition wall according to the design.
The fourth step is to install the top keel and ground keel according to the position line of the partition wall that has been placed. Install the top keel and ground keel according to the line, and fix them on the main body with nails. The nail distance is .
The fifth step is to divide the vertical keels according to the position of the door opening of the partition wall. After installing the top keel, according to the specifications or width of the cover panel, the bale specifications and dimensions are: Position the first cover panel on the edge of the door opening frame so that the broken edge plaster cover panel is not at the door opening frame.
The sixth part is to install the keel. Install the vertical keel according to the graded position. The upper and lower ends of the vertical keel are inserted into the top keel and the ground keel. After adjusting the verticality and positioning accurately, use blind rivets to fix the wall and column edge keels with nails. Or wood screws are fixed to the wall or column, and the nail distance is.
A certain positioning elastic line
As the first process of installing the light steel keel of the suspended ceiling, the elastic line is the most basic process. The installer needs to use a level to pop up horizontal lines at each corner of the house, and then pop up the level lines at the design height of the ceiling plus a layer of boards.
2. Fix the hanging rods
Use expansion bolts to fix the hanging rods. Different ceilings have different fixing methods. The installer needs to pay attention to maintaining sufficient load-bearing capacity of the hanging rods during installation.
Three-sided keel installation
According to the line played previously, fix the galvanized green steel bar to the embedded part along the horizontal keel line.
Installation of four main keels
When installing the main keels, they should be hung on the boom, parallel to the length of the house. During installation, the arch must be raised, and the height must be the span of the house
/
Five keel installations
Here are mainly divided into open keel and dark keel. Different types of keels are installed in much the same way. It needs to be installed close to the main keel. The distance is probably
appropriate.
Six-frame correction
The installed light steel keel of the suspended ceiling needs to be comprehensively corrected, and all components should be clamped firmly to ensure the stability of the overall frame.