Libiao numbering machine C-210T wire sleeve numbering machine

产品型号：

C-210T

打印精度：

300dpi

打印速度：

25mm/s

[]_Copy Canon wire-marking machine model is a new model evolved from the earliest one. Since the original Canon was a machine that could only print in English, but with the continued sales of Canon's wire-marking machine products in the Chinese market, it later became Introduced new Chinese wire number machine products. It was under this circumstance that Canon promoted the Chinese market. Canon's line number printer models not only had a complete Chinese operating system, but also made great improvements in the printing speed of the line number printer. Printing speed is now essentially twice as fast as previous information.
Canon thread marking machine ribbons are used on Canon thread marking machine models and are produced in Vietnam. However, it is guaranteed by Canon's outstanding quality system, so during the use of Canon's ribbons, it is rare that the ribbon breaks and cannot print. And when used in conjunction with Canon's imported wire marking machines, the effect of the printed sleeves is very good. Unless a particularly poor quality sleeve is used, problems may occur during the printing process, but it is still very good compared to alternative ribbons.
The failure rate of the Canonli line marking machine is lower (English (中英 (中英 (中英) (中英) (中英) (English (中英)) Compared with imported wire marking machines and domestic wire marking machines, the failure rate It is lower, and the probability of damage to consumable spare parts is also lower. For example, the cutter is more reliable to use compared with the cutter of the Heshuofang line number machine. The cutters of Canon Libiao and Shuofang are both It comes with a spring. When the cutter is working, after cutting the casing downward, it bounces up by the spring and returns automatically. Every time it is cut, the spring will be pressed down and bounced up. If the frequency of use is high, the cutter spring will break. In this case, the Canonline line marking machine is slightly more stable. It usually needs to be replaced after a few years of use. However, there will be very few cases where the spring breaks after a short period of time. Of course, in most cases Like Canon, it needs to be replaced after a few years of use.