Hongyuan supplies imported ASP-60 mold steel wholesale and what is the price of ASP-60? ?

Steel
Mold steel
Swedish ASSAB
Pre-hard material
Clinker
Price
Heat treatment material
Hard material
Steel plate
Round bar
Chemical composition
Characteristics
Good grinding performance
Good heat treatment dimensional stability
Good toughness
Very good Red hardness
Very good wear resistance
Application
The steel is especially suitable for single-edged tools that have high requirements on steel wear resistance and red hardness.
Such tools include cutting tools, turning tools, forming tools, cold work tools and tools for machining materials that are difficult to machine.
The lower machinability of the annealed condition will result in good performance in the final tool if tool manufacturing permits. Examples include end mills, cutting tools with a simple shape but extremely long life, or simple cold work tools.
Special properties
Steel can reach very high hardness and red hardness. In addition, like other series of steels, it has the advantage of good stability in size and shape during the hardening process. And they have the same toughness regardless of size. The machinability is lower than other high speed steels. The grinding performance is better than that of other high-alloy high-speed steels but slightly inferior.
Physical properties
Density
/
Modulus of elasticity
/
Coefficient of thermal expansion
Degrees from ℃ per ℃
Manufacturing tools
It can be thermoplastic forged, formed, machined, grinded, electrically processed, welded and polished like other high-speed steels. But cold forming processing should be avoided.
Grinding and electrical machining can be well applied to high alloys. During grinding, local surface overheating must be avoided. Tungsten steel or high-speed steel tools can be used for machining.
Flexural strength
Flexural strength is used to measure the toughness of a material. The toughness and hardness of the material can be controlled through different quenching temperatures.
The bending test specimen is a round rod with a diameter of 100 mm, which is quenched and tempered three times at ℃ for one hour each time.
Ultimate bending strength/.
Flexural yield strength/.