Year1
- 型号：
- 齐全
- 规格：
- 齐全
An overview of Greed's vertical cabinet-type exposed fan coil units. With the cooperation of relevant research and design institutes, our company specializes in the production of luxury multi-functional remote control wall-mounted vertical cabinet fan coil units. It is mainly composed of low-noise fan coil units and high-efficiency fans. Heater) microcomputer controller and other components. It is widely used in air-conditioning occasions of multi-room or large-space companies or civil buildings such as hotels, factories, hospitals, exhibition halls, shopping malls and first-level office buildings to meet the requirements of temperature regulation, dehumidification and heating, and create a leisurely, quiet and spring-like working environment for people all year round.
The wall-mounted vertical cabinet fan coil units produced by our company
mainly have the following characteristics
Simple control and complete functions. The wall-mounted vertical cabinet fan coil units are all controlled by microcomputer programmed infrared remote control and have switches. Temperature setting, wind speed, automatic adjustment of wind direction, automatic change function and room temperature display function.
Safe, reliable and long service life. Each unit has undergone pressure leakage detection and the inlet and outlet water pipes are made of forged brass structure. It is safe and reliable and has a service life of more than 2 hours.
High efficiency and sufficient energy. The heat exchanger adopts seamless copper tubes and high-efficiency aluminum fins with bidirectional cracks that are stretched into one body. The fins have tight heat transfer efficiency, high cooling capacity and sufficient cooling capacity.
Low noise. The wall-mounted type uses imported oil-free rolling bearings and adopts a new type of aluminum cross-flow wind wheel. The vertical cabinet type adopts a new centrifugal wind wheel, which greatly reduces the noise while increasing the service life.
The new panel air outlet frame and panel integrated design, unique vertical air inlet design, ingenious computer remote control part exquisite design, panel changeable design, the whole machine can use the same structure product to have a variety of appearance.
Cooling capacity, heating capacity and other properties are measured under the following conditions
Refrigeration capacity measurement conditions dry inlet water temperature difference ℃
Heating capacity measurement conditions dry inlet water temperature ℃
Air volume measurement conditions out The static pressure at the air outlet is
>Two technical parameters
Project specifications
Air volume/
Cooling capacity
Heat supply
Noise
Power
Water volume
Water resistance
Water inlet and outlet pipes
Overall dimensions
High
Medium
Low
High
Medium
Low
High
Medium
Low
Length*
Width*
Height
≤
≤
**
≤
≤
**
≤
≤
′′
**
≤
≤
**
≤
≤
**
Note that the water temperature must not be exceeded during fan coil heating.
>Three Precautions for Safe Use
The wall-mounted fan coil unit should be installed on a vibration-free and solid wall and calibrated to a level. When installing hanging boards, ensure that the horizontal direction is horizontal and the vertical direction is vertical. Each unit's hanging plate fixing screws shall be no less than
The weight that the hanging plate should be able to withstand after installation. Post-type fan coil air conditioners should be installed on level ground. The base of the unit has ground fixing holes that can be fixed to the ground with expansion screws. There is a unit fixing plate on the top of the back of the unit, which can also be removed to fix the unit to the wall.
Taking into account the convenience of maintenance, the unit should be installed farther away from the wall than
.
Pipes can be connected in several directions, left and right, and the interface hose should be made of pressure-resistant rubber or metal hose. After installing the pipe, confirm that there is no leakage and insulate the entire pipeline. Otherwise, condensation water will occur.
The surface of the heat exchanger fins should be kept clean and can be blown with compressed air. Through heat exchange, the water in the copper tube becomes soft water to reduce the generation of scale.
The inner cavity of the copper pipe should be cleaned during the working year. Chemical methods can be used to remove scale inside the water pipe.
Please install a water inlet valve in front of the water inlet to ensure that the water path is closed when the fan is stopped. There is a battery valve socket on the circuit board inside the machine, which can be used after plugging it in.
WhatsApp
