Explosion-proof water bag | 60L explosion-proof water bag | GD explosion-proof water bag

Explosion-proof water bag
Explosion-proof water bag
Explosion-proof water bag
Jining explosion-proof water bag
Guolong explosion-proof water bag
Explosion-proof water bag for coal mines The water tank is a high-quality product produced and inspected in strict accordance with standards. It has the function of flame retardant, anti-static, good carrying capacity, no leakage and easy installation. The explosion-proof water bag explosion-proof water tank is a reliable product that effectively prevents the spread of flammable gas and coal dust explosions underground in coal mines. It has complete specifications. Product Description Fire protection, anti-static and other safety features.
1. Technical Requirements
The water bag sink should comply with the provisions of this standard and should be manufactured according to the approved drawings and documents according to the prescribed procedures. Outsourced materials should have certificates of quality and must pass inspection before they can be used.
The specifications and dimensions of the water bag tank should comply with the requirements in the table. The actual water capacity shall not be less than the nominal volume.
Table
Item
Model
Name
Nominal volume
Length
Width
Height
Dimensional deviation
Sink
Upper plane
Lower plane
Upper plane
Lower plane

Upper plane
Lower plane
Upper plane
Lower plane

Upper plane
Lower plane
Upper plane
Lower plane
Water bag




The water distribution characteristics should meet the following requirements
The explosion pressure (expressed as static pressure) required for the water tank to break shall not be greater than the explosion pressure (expressed as static pressure) required for the operation of the water bag.
The action time to form the optimal water mist shall not be greater than
The optimal water mist duration for the water tank shall not be less than that for the water bag
The optimal water mist dispersion length shall not be less than
The optimal water mist duration The mist dispersion width shall not be less than the optimal water mist dispersion height.
The explosion-proof performance should meet the following requirements. The explosion flame from the explosion source shall not exceed.
The two-structure water bag has a long trough-shaped bottom and a semi-circular seam. The seams are firmly bonded and the surface is neat and smooth as shown in the picture. The water tank is rectangular and trapezoidal and is formed in one step with a smooth surface as shown in the picture.
Mainly engaged in explosion-proof water bags
Explosion-proof water bags