PP melt blown filter element*Oil field water injection filter element*Alcoholic beverage filter element

Melt-blown filter element*Oilfield water injection filter element*Alcoholic beverage filter element Dali | Dalian * Yangzhou Description
Melt-blown filter element is a tubular filter element made of non-toxic and odorless polypropylene particles that are heated, melted and spun, drawn and formed. If the raw material is mainly polypropylene, it can be called a melt-blown filter element< br/> Not only is it used in large quantities for water purification, it has outstanding chemical compatibility and is suitable for the filtration of strong acids, strong bases and organic solvents. Strong dirt holding capacity, long service life and low cost
Filtration accuracy
Applicable values
The maximum pressure difference forward working temperature is <.
Sterilization resistant to minutes of online steam sterilization.
The endotoxin content in the water extract of the endotoxin filter column has been tested to be lower than
Performance characteristics
Filtration efficiency and filtration accuracy. The pore size density of the filter element is uniform and the filtration efficiency is above.
Small filtration resistance, large filtration flow, large dirt holding capacity and long service life. The fiber diameter and gap of this product are adjustable during the production process. The microporous inner layer of the filter element is small and the outer layer is large, which increases the flow rate and dirt holding capacity. The filter element is not easy to be blocked and extended. service life.
It has high cleanliness, no pollution to water quality, and is resistant to acid, alkali and organic solvent corrosion.
The filter element is strong and the filter element will not deform when the pressure difference between the inlet and outlet water of the filter exceeds ℃. The filtration efficiency will not decrease when the temperature exceeds ℃.
This product is modified polypropylene and has extremely high hydrophilic properties, absorbing ten times the weight of water, so it can be used for oil-water separation.
Notes
Please select a filter element based on the accuracy of the filtered liquid and the impurities it contains. For viscous liquids, you can use a secondary filtration pre-coarse filter to reduce resistance and extend the service life of the filter element (usually times).
Please install the filter element correctly. If the filtered water is found to be contaminated, carefully check whether the filter element is skewed and whether the two ends are strictly aligned and pressed.
When the pressure difference reaches the filter element, the filter element should be cleaned or replaced.
Application fields
Pre-filtration of various injection liquids and injection bottle washing water in the pharmaceutical industry and pre-filtration of various antibiotic and traditional Chinese medicine injections.
Filtration of alcoholic beverages and drinking water in the food industry.
Pre-filtration of pure water and ultrapure water in the electronics industry.
Filtration of various organic solvents, acid and alkali liquids in the petroleum and chemical industries, oil field water injection filtration.