New centrifugal aerator

>New centrifugal aerator
This type of centrifugal submersible aerator is used in the aeration tank of the sewage treatment plant to oxygenate and mix the mixed liquid of sewage sludge and to perform biochemical treatment or breeding of sewage. Pond oxygenation.
The equipment is commonly known as centrifugal aerator, diving aerator, diving jet aerator, diving centrifugal aerator, self-priming diving aerator aerator, diving aeration series, diving aerator, diving centrifugal aerator, diving push Flow aerator Aerator Sewage treatment aerator Jet aerator Surface aerator Flow aerator The air grit chamber oxygenates and mixes the sewage sludge mixture and performs biochemical treatment of sewage or oxygenation of breeding ponds.
Principle
The centrifugal submersible aerator is a direct-coupled structure. The rotating impeller generates a centrifugal force in the water, forming a negative pressure zone around the impeller. The air is sucked in through the air inlet pipe. The sucked air and water are mixed in the mixing plate, and then this good and uniform mixture is automatically discharged from the discharge port.
This process includes the following aspects. The air and water in the mixing plate are mixed to produce a gas-liquid mixing effect. The gas-liquid mixture discharged from the outlet forms a cycle and convection. The oxygen in a large number of air molecules moves at high speed to obtain an extremely high oxygen absorption. efficiency.
Features
High oxygen dissolution rate, high proportion of tiny bubbles, high oxygenation efficiency and wide oxygenation area
The horizontal aeration flow with no dead zone entrained bubbles in the pool can completely flush the pool Each corner of the bottom
The structure is simple and compact. The unit has a long life and can withstand large loads. The bearings use an oil bath to seal the rotating shaft and suck the air into the impeller cavity to prevent water from contacting the seal during operation. These ensure that the aerator can continue to operate for hours. Long-term trouble-free operation
Saving project investment, no need to provide air source, eliminating the need for a blower, easy installation and low noise