Supply Delta brand mold temperature controller TM-600W-Zhongshan Delta Plastic Machinery Co., Ltd.

产品别名：

水式模温机

产品型号：

TM-W

适用领域：

化工，注塑，挤出，电子

Supply of Delta brand mold temperature controller Zhongshan Delta Plastic Machinery Co., Ltd.
Delta brand water type mold temperature controller
》》Water type mold temperature control machine
Description
Series water There are two series of mold temperature controllers: standard type and high temperature type, which are mainly used for heating and constant temperature of molds. In addition, it can also be applied to other fields with the same needs. This series of mold temperature controllers directly cools the return water of the mold, then is pressurized by a pump and heated at high temperature by an electric heating pipe before being sent to the mold to meet heating and constant temperature requirements. Its optimized design enables the heating temperature to reach
℃
℃
. The use of precise
temperature control ensures high performance and stable temperature control, and the temperature difference can be controlled within
℃
℃
.
》》Features of this machine
Using all-digital
Segmented temperature control system can maintain stable mold temperature under any operating conditions. The temperature control accuracy reaches
℃
Multiple safety devices When a malfunction occurs, the machine can automatically detect abnormalities and have indicator lights to display abnormal conditions
Direct cooling has excellent cooling effect. The automatic direct water replenishment device can quickly cool down to the set temperature
Internally adopted Made of stainless steel, high-pressure explosion-proof
The appearance design is beautiful and convenient for disassembly and maintenance.
》》 Schematic diagram of the working principle of the water-type mold temperature controller (direct cooling)
The high-temperature water coming back from the mold returns to the mold temperature controller through the pipeline, is pumped and pressurized, and then transported to the heater to be heated by the electric heating tube. Send it to the mold in this cycle. During this process, if the high temperature water temperature is too high. The system starts the solenoid valve and the cooling water enters the system to directly cool the high-temperature water and reduce the temperature of the high-temperature water to achieve constant temperature. If the temperature of the high-temperature water is still maintained at a high temperature of the equipment, the system starts a high-temperature alarm and stops working. If the cooling water pressure is lower than the set requirement, the pressure switch sends a low-pressure alarm. The system starts a low-pressure alarm and stops working.
Water type