Galvanized cable hook price Galvanized cable hook manufacturer

型号：

电缆挂钩

规格：

111

地址：

济宁

Model cable hook model naming mainly consists of product name, code, main parameters and improvement code. They are cold stamping and secondary welding.
Cold stamped cable hook
Except for the punched surface, the surface condition of the cable hook must be consistent with the sheet material used. Slight stretch lines and small surface unevenness are allowed during the forming process. The allowable height of cable hook burrs after shearing or punching the cable hook hook plate shall comply with the provisions of "Burr Height of Stamping Parts". There should be no burrs on the surface in contact with the cable.
Welding cable hook
According to national standards, the welding surface of the welding cable hook is allowed to have a small number of welding spots and welding lines, and the extended edge of the cable contact surface will not cut the cable.
The use of cable hooks requires an ambient temperature of ℃. The air environment used does not contain corrosive components such as acids and alkalis.