How to waterproof a house in summer rainy season

How to waterproof a house in the summer rainy season
Recently, the weather in most parts of the country has been dominated by heavy rains. During the summer rainy season, moisture and rain protection has become a concern for many people. Ceiling water seepage, wall peeling, and water accumulation on the terrace will cause a lot of troubles if they are not carefully prevented and dealt with. So how should we prevent and solve it? Guangzhou Anders Waterproofing Manufacturer will provide you with a detailed analysis of the moisture-prone corners and causes of moisture in your house, and provide prevention and solution tips.
Moisture-proof key points
Be careful to prevent rain leakage from ceilings and windows
House water seepage problems mainly occur on the top floors and basements of old houses and new houses. The reason is that during the construction process, the waterproof layer of the outer wall was not tightly adhered to the wall corners, and rainwater penetrated into the bricks inside the wall through the gaps in the waterproof layer, causing moisture to soak and leak at the ceiling corners inside the house. Wall peeling off.
If the brick body has been in a damp state, even if the damp wall paint is scraped off and repainted inside the wall, the moisture in the brick will slowly seep out, causing the wall to be damp again.
The main problem of non-penthouse houses is leakage and water seepage from windows. On the lower side of the window, especially on the wall below the balcony window, the contact between the window edging and the facade is often severely corroded by moisture, causing cement blocks to fall off. There are two reasons for this situation. First, the doors and windows are not tightly sealed when they are installed on the wall, or the doors and windows have been used for a long time and the glue falls off, causing water leakage. Second, during the construction stage of the windows, the window sill is vertically The location exceeds the drip line, causing rainwater to drip onto the windowsill.
Treatment methods For water seepage in the wall, after the external waterproof layer is repaired, all the wet parts of the internal wall should be removed to expose the red bricks. After drying, putty and paint again.
During the window construction process, it is necessary to ensure that the outer slope of the window sill is leveled, so that even if a certain amount of water seeps in, it can be ensured that it will not accumulate at the window sill. To solve the problem of water intrusion in windows, users are advised to remove the original colloid, scrape off all wetted facades before resealing them, and re-scrape them with putty and paint. During the reconstruction project, waterproof putty and paint should be used to ensure the waterproofness of the wall from the inside.
Tips: Right above the window, centimeters inward from the eaves, there will be a millimeter-square groove. Its function is that when rainwater flows back toward the window, it will naturally drip when it encounters the groove and will not flow to the window. When buying a house, pay attention to this, otherwise the windows will easily blister due to moisture.
(Join Anders Waterproofing to achieve your dream of wealth. The top ten brands of waterproof materials/famous brands in China/the preferred brand of green building materials are derived from German technology, imported raw materials, and world-class quality) Anders Waterproofing, your best choice! Top ten brands of waterproof materials! ! !
Guangzhou Anders’ waterproof coatings have guaranteed quality and are relatively flexible and affordable.
Guangzhou Anders Waterproofing, one of the top ten brands of waterproof materials, German technology, international quality, no fear of leakage, waterproof gold quality.
Guangzhou Anders Waterproof Investment Hotline Huang Yi
Colored Highly Flexible Waterproof Coating