Special waterproof materials for bathroom water seepage and waterproofing

Special waterproof material for bathroom seepage and waterproofing
Anders colorful flexible waterproof coating is a two-component polymer modified cement waterproof material. The slurry is made of imported polymers with various additives added. It has high adhesion, flexibility, mildew resistance and wear resistance. The powder is composed of high-quality cement, quartz sand and unique active substances. When exposed to water, , a chemical reaction occurs, penetrates into the structure and forms crystals, which not only blocks the passage of water in all directions, but also strengthens the structure and extends its life.
1. Characteristics and advantages
For moisture-proofing, the coating thickness is about 500kg/
For waterproofing, the coating thickness is about 500kg/, and can be constructed on wet base surfaces.
. It has strong bonding force with the base material. The active ingredients in the slurry can penetrate into the capillary pores and micro-cracks in the cement base surface and produce chemical reactions. It blends with the substrate to form a crystalline and dense waterproof layer.
After the slurry is dry, you can directly proceed with the process of pasting ceramic tiles without making a protective layer of mortar.
It is used on the water surface facing or on the back surface, and its waterproof effect remains unchanged.
The main components of this product are inorganic materials, which have no aging problem and have permanent waterproof effect.
Good breathability, keeping everyone dry.
, non-toxic, harmless, environmentally friendly product
2. Scope of application
Indoor and outdoor concrete structures, cement plastering, waterproofing of interior and exterior walls, kitchens and bathrooms.
Factory buildings, water conservancy projects, grain warehouses, tunnels, underground parking lots, floor walls, swimming pools, drinking water pools and other building parts with stable structures are waterproof.
3. Technical indicators
Execution/standards.
IV. How to use
Pour the additive into the container and stir evenly, then slowly pour the powder into the water, and stir thoroughly to form a uniform paste without particles or precipitation.
Keep intermittent stirring during operation to prevent precipitation.
Use a brush or roller brush to directly apply the glue and the base surface. Do not leave any holes for moisture-proofing. Apply one layer for waterproofing and two to three layers. The second coat should be applied in a staggered direction from the first coat.
5. Reference dosage
For moisture-proofing, the coating thickness is about 100kg/
For waterproofing, the coating thickness is about 50kg/
Anders waterproof, waterproof Top ten brands of coatings and waterproof materials are recruiting agents from all over the country
Huang Yi
Colored universal flexible waterproof coatings