Sakura/Nanning Sakura water heater after-sales service (repair + after-sales)
Nanning Sakura water heater after-sales telephone number***
Nanning Sakura water heater after-sales maintenance telephone number is professional service! Training, professional technicians! Worth choosing! Get your appliances repaired and your appliances will never have to be repaired
! Customer first, considerate service, and honest service. Customer satisfaction is our greatest pride. Zero defective service and satisfied customers. Electricity
Precautions for using water heaters
The door-to-door maintenance service process in Nanning is as follows
The first step is to call the hotline *****. The second step is to register for an appointment/the third step is to come to the door on time. The fourth step Check for fault@@@@@@@. .
Step 5 Determine the cost,,,,,,,,, Step 6 Troubleshooting Step 7 Fill in the voucher ||||||\\|\ Step 8 Provide warranty
Nanning Sakura Water Heater After-sales service phone number***
The machine has started to start. If the display is static, it means that the machine is in standby mode.
, the machine has been started without heating. Check whether the installation wiring is correct during installation, such as whether the live wire and neutral wire are connected reversely.
If the live and neutral wires are connected reversely, the machine will only show
no heating. Generally,
manufacturers use brown-red as the live wire and blue as the neutral wire.
, the machine is not started, but it is displayed. When this problem occurs, the machine does not sense normal water pressure. It needs to be checked whether any debris got into the water inlet pipe during installation. Debris entering will block the Hall flowmeter, causing the Hall flowmeter to not start. The inside of the machine Naturally, water pressure will not be sensed and the machine will not start. A backflush machine is needed, which means to interchange the outlet and inlet pipes to flush out the debris.
The other one is the blockage of the water inlet pipe and shower head. Both blockages also cause the machine to not start, and there is a display. We need to unscrew the shower head and water inlet pipe and clean the stolen goods inside. Especially for a long time, the shower head should be cleaned frequently.
The second reason for the machine not heating
The machine has no display. You need to check whether the circuit is properly installed and whether the circuit interface is not in complete contact. If
this problem occurs after long-term use, then
it is possible that the monitor is damaged, and you need to contact the merchant to replace it with a new monitor.
, the machine does not heat up obviously, one is cold and the other is hot. This is very likely caused by the instability of the local voltage or water pressure which is at a peak period of use. Also, part of the heating element inside has been burned out. You need to contact the merchant in time to replace it.
In our daily lives, once a problem occurs with our hot water heater, we need to go to a professional repair center for effective maintenance in time
so that it can be repaired as soon as possible. Hot water heater
Non-professionals are not allowed to disassemble and repair! In special gas industries, if non-professionals operate it, air leakage will occur and there will be unsafe factors! Remember to find professionals
Maintenance personnel will come to your door for service and inspection!
When users need to move, renovate, etc., they may need to repair the original hot water heater. Our center has made special plans and arrangements for this issue. When you encounter the above problems, you can call the
central service phone number to make an appointment. The Sakura water heater after-sales maintenance service center will arrange a visit to solve the problem as soon as possible
Nanning Sakura water heater after-sales maintenance service phone number, /, {{[ < br/>
Year1
WhatsApp
