Disassembly, assembly and installation of single-stage gas generators must be carried out in conjunction with the instructions

The disassembly and installation of a single-stage gas generator must be carried out in conjunction with the instructions. In order to facilitate disassembly and installation during replacement, the weight and volume of frequently damaged components must be reduced as much as possible. Therefore, the tuyere part is divided into a large set of tuyere, two sets of tuyere, and three sets of tuyere (commonly known as tuyere). After the iron is eroded and gradually becomes thinner, the second set of tuyere will be in direct contact with the liquid slag iron. Therefore, the cast copper material with good thermal conductivity and the cavity water-cooling structure are used to form a protective layer of slag iron condensation. The tuyere protrudes into the furnace hearth. Due to direct contact with the furnace charge and liquid slag iron, the working conditions are harsh and may cause dust to fly during the transportation of coal. Therefore, closed carriages must be used to transport the coal and water should be used to wash the coal. Coal gas is a clean gas fuel suitable for burning colored glazed bricks, porcelain tiles, vitrified tiles, colored glazed mosaics and crystal tiles. Compared with burning diesel, the glaze quality of the product has been improved, but when the control is not good, black core is easy to appear and is not suitable for burning permeated polished tiles. The Ministry of Commerce collects data and other databases. Among them, macroeconomic data mainly comes from the National Bureau of Statistics, some industry statistics mainly come from the National Bureau of Statistics and market research data, corporate data mainly comes from the National Bureau of Statistics' large-scale enterprise statistical database and stock exchanges, etc., and price data mainly come from various markets. Monitoring database. There are no refractory bricks in the top cover of either single-stage or double-stage furnaces. Since the furnace top cover also has fire detection holes in addition to the coal adding device and coal separator, the use of refractory bricks will not ensure the strength of the structure, and the building blocks will not be able to ensure the strength of the structure. No way to operate. Therefore, the furnace roof cover is mostly made of a full water jacket or the furnace roof is concreted with refractory castables.