Threaded stainless steel soft seal gate valve

连接方式：

丝口

压力：

1.6

温度：

80℃

Threaded stainless steel soft seal gate valve
Stainless steel gate valve
,
Threaded stainless steel gate valve
,
Stainless steel soft seal gate valve
Soft seal gate valve is an updated product of the gate valve. The gate is integrally wrapped with special rubber, and the elastic deformation of the rubber is used to seal the valve to achieve zero leakage. There is no gate groove in the valve cavity, no debris is retained, the resistance is very small, and the switch is light. It adopts three-way sealing ring, which ensures reliable sealing. The unique design structure allows the sealing ring to be replaced under pressure, without pressure on the packing and maintenance-free. Both the inside and outside of the valve body are electrostatically sprayed with non-toxic epoxy resin, which will not produce rust water and can meet the requirements of direct drinking water.
Product Features of Soft Seal Gate Valve
Flat-bottomed Valve Seat
Traditional gate valves are often deposited by foreign objects such as stones, wood blocks, cement, iron filings, debris, etc. after the pipes are washed with water. In the groove at the bottom of the valve, it is easy to cause water leakage due to inability to close tightly. The bottom of the elastic seat seal gate valve adopts the same flat bottom design as the water pipe, which is not easy to cause debris accumulation and allows the fluid to flow unobstructed.
Integral rubber coating
The valve uses high-quality rubber for the overall inner and outer rubber. European
The leading rubber vulcanization technology enables the vulcanized valve to maintain precise geometric dimensions, and the rubber and Ductile iron valves are firmly connected, not easy to fall off and have good elasticity.
Corrosion resistance
The valve body is coated with powder epoxy resin, which can prevent corrosion and rust of the valve body, and can be used in sewage systems
Precision cast valve body
Fu One valve, Fuyi Fluid Control (Xiamen) Co., Ltd. is located in Xiamen, the economic zone on the west coast of the Taiwan Strait. It is a professional valve enterprise integrating R&D, production, sales and service. The company brings together many elites in the valve industry
The valve body is precision cast, and the precise geometric dimensions ensure the sealing of the valve without any finishing work inside the body.
Light weight
The main body is made of high-grade ductile iron, which is about

lighter than traditional gate valves and is easy to install and maintain.
Helpful for drinking
Since the inside of the valve body is coated with non-toxic epoxy resin,
the inner and outer surfaces of the valve are completely covered with rubber without rust or corrosion. It can be used Raw drinks