Goose manure - processor effect

Goose manure treatment machine effect mobile phone landline
Jining Liyang is the first manufacturer in Shandong Province to make goose manure treatment machine effect
Your trust is our biggest motivation and innovation
Goose manure treatment Several characteristics of the machine effect
Advanced nature This series of machines has strong decontamination ability, no clogging, and is easy to clean.
Durability The screen dragons of this series of machines are made of nickel alloy steel and high-strength carbon steel, which have high corrosion resistance and long service life.
Economy: This series has a high degree of automation, low power consumption and low price. Easy to operate, just press the start stop button to operate.
Installation process of goose manure treatment machine effect
The whole machine is easy to install and debug. It can be used normally after being installed in a room of about one square meter.
The effect of the spiral extruded goose dung treatment machine is the most advanced technical equipment in the same industry both at home and abroad. We chose the screw extruded goose dung treatment machine produced by the Ministry of Agriculture Planning, Design and Research Liyang. .
First of all, users are required to have a relatively comprehensive understanding of its working principle, and secondly, they must master the performance and maintenance principles of each component one by one, so as to maximize the overall performance of the whole machine.
Users who have newly installed the goose manure treatment machine should fill the discharge port of the machine with about 10% water-containing material slag before normal operation, and then adjust the position of the counterweight block at the maximum torque to form The pressure layer of goose manure processor effect. The goose manure treatment machine that has not filled the pressure layer cannot be started and operated, because after the manure is pumped in, it will immediately spray out of the discharge port without pressure. Please remember to fill the discharge port completely
Maintenance process during use of goose dung treatment machine
The use of goose dung treatment machine needs to be managed by a dedicated person. The person in charge must understand the performance of the whole machine and perform regular care and maintenance. Generally, during normal use, every time Clean the mesh screen every one or two months. When cleaning, first remove the discharge port bolts, then take out the mesh screen, and use clean water and a copper wire brush to clean the blockage in the mesh screen.
Goose manure treatment machine effect composition
Goose manure treatment machine effect is mainly composed of the host non-blocking pump control cabinet pipes and other equipment. The main body consists of mesh screen extrusion auger vibration motor reduction motor counterweight unloading device.
Note: It is particularly important to keep the original installation position of the mesh screen. When removing the mesh screen, please pay attention to the position of the guide rail of the mesh screen. It is best to mark it and keep the original position during installation. Otherwise, In the future operation, the wear of the mesh screen will be increased, which will naturally affect the discharge efficiency of the goose manure processor.
The working characteristics and technical requirements of the goose manure processor
The working process is as follows. The non-clogging pump pumps unfermented pig manure water into the machine body, and accelerates the blanking under the action of the vibration motor. At this time, it is powered by The transmission and squeezing auger gradually push the dung water to the front of the machine body, and at the same time continuously increase the pressure on the front edge, forcing the moisture in the material to squeeze out of the mesh screen under the action of the side pressure belt filter and flow out of the drainage pipe.
The work of the goose manure processor is continuous. The material is continuously pumped into the body, and the pressure on the front edge continues to increase. When it reaches a certain level, the discharge port is pushed open and the extrusion port is squeezed out. , to achieve the purpose of extrusion and discharging.
In order to control the discharging speed and moisture content, the counterweight block under the main machine can be adjusted to achieve a satisfactory and appropriate discharging state.