Permanent magnet roller conveyor belt permanent magnet iron remover manufacturer

Yangsen Iron Remover Magnetic Separator Overview The disk magnetic separator is used to remove iron powder from reused powdery granules. The magnetic separator is widely used in resource recycling, wood industry, mining, kiln industry, chemical food and other factories. It is suitable for Wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials below the particle size. It is also used for iron removal of coal, non-metallic minerals, building materials and other materials. It is the most widely used machine in the industry with high versatility. One of the species.
Working principle of magnetic separator
After the ore slurry flows into the tank of the disc magnetic separator through the ore feeding box, under the action of the water flow from the ore feeding water spray pipe, the ore particles enter the feeding tank in a loose state. Mining area. Under the action of the magnetic field magnetic separator, the magnetic mineral particles gather together to form magnetic clusters or magnetic links. The magnetic clusters or magnetic links are affected by the magnetic force in the slurry, move toward the magnetic pole, and are adsorbed on the cylinder. Since the polarity of the magnetic poles are alternately arranged along the rotation direction of the cylinder and are fixed during operation, when the magnetic clusters or magnetic links rotate with the cylinder, magnetic stirring occurs due to the alternating magnetic poles and is mixed in the magnetic clusters or magnetic links. The gangue and other non-magnetic minerals in the magnetic chain fall off during the turning, and the magnetic cluster or magnetic lotus that is finally attracted to the surface of the cylinder is the concentrate. The concentrate moves with the cylinder to the weakest magnetic force at the edge of the magnetic system, and is unloaded into the concentrate tank under the action of the flushing water sprayed from the ore unloading water pipe. If it is a fully magnetic magnetic roller, the ore unloading is carried out with a brush roller. Non-magnetic or weakly magnetic minerals are left in the slurry and discharged out of the tank with the slurry, which is tailings.