Urumqi stone crusher jaw crusher tooth plate stone jaw crusher tooth plate customized

Crushing is due to the expansion of internal cracks under the action of the internal tensile stress of the material, causing the material to break apart. When the upper part of the crushing cavity is crushed, the movable jaw has more downward strokes, while in the lower part, due to the large upward crushing stroke, it can be considered that during the crushing When the movable jaw moves downward during the stroke, the material has basically completed crushing. Therefore, there are obvious scratches on the middle and lower parts of the fixed jaw plate that are severely worn, while there are basically no scratches on the movable jaw plate.
First of all, when purchasing a crusher jaw plate, be sure to select a crusher jaw plate of the same model as the crusher, and it must be of acceptable quality. During use, the crusher can be operated normally before adding the crusher jaw plate. Materials are strictly inspected before being added. Once any materials that cannot be broken are found, they are immediately removed. The crushed materials must match the model of the crusher. If it is found that the discharge particle size does not meet the requirements, the parameters of the crusher must be adjusted accordingly. The wear of the crusher jaw plate can be reduced but is inevitable. If it is worn, it can be repaired by surfacing. , then it can be used again without purchasing a new crusher jaw plate, which reduces the expenditure cost. If a blockage is found during crushing and production cannot be achieved, the motor should be shut down immediately to prevent damage to the crusher. Although the materials crushed by the jaw crusher are different, the jaw plate of the crusher can be cast with specific materials according to the characteristics of the materials, so it is very easy to use. The reason why the high manganese steel jaw plate cast by Tongwang Machinery is loved by the public is not only because of Yusheng's brand, but also because Yusheng's products and services can be used by customers with confidence. It has to be said that many companies are using When purchasing the crusher jaw plate first, be sure to select the crusher jaw plate of the same model as the crusher, and it must be of high quality. During use, materials can only be added after the crusher can operate normally. There are strict random inspections of materials beforehand. Once any materials that cannot be broken are found, they will be removed immediately. The crushed materials must match the model of the crusher.
If it is found that the discharge particle size does not meet the requirements, the parameters of the crusher must be adjusted accordingly. The wear of the jaw plate of the crusher can be reduced but is inevitable. If it is worn, surfacing welding can be used If it is repaired in this way, it can be used again without purchasing a new crusher jaw plate, which reduces the expenditure cost. If a blockage is found during crushing and production cannot be achieved, the motor should be shut down immediately to prevent damage to the crusher. After installing Tongwang brand high manganese steel jaw plates, the production efficiency of the company has been improved to varying degrees. National sales hotline of Zhengzhou Tongwang Machinery Equipment Co., Ltd.