Year1
- 产品类型：
- 无线太阳能声光报警器
- 传输方式：
- 无线
- 无线频率：
- 315/433MHz±0.5MHz
The alarm host can receive the coded signals from each sensor and send the alarm message through the telephone line pair. It consists of a microcomputer controller, a built-in telephone line anti-cut sensor, a built-in speaker, etc., and is used for both AC and DC.
The wireless remote control is usually hung with the owner's key. It is mainly used for starting and disarming (arming and disarming) and emergency calls for alert status.
The infrared detector installed at the entrance of the room at the entrance of the stairs uses advanced pulse counting technology, which greatly reduces the false alarm rate, and has a low-voltage display function. Mainly used for space detector alarm when illegal gangsters invade. Within the designated detection area, once the infrared radiation of human movement is sensed by the detector, it will immediately transmit a coded signal to the host.
The door magnetic detector is installed on the door and uses a pair of magnetic switches. When an illegal break-in occurs, the host alarm is triggered.
The vibration detector is installed on the glass. When a broken window occurs and a room is broken into, the host alarm is triggered.
The transmitter end of the wireless infrared through-beam detector (invisible anti-theft network) emits multiple invisible infrared defense beams to form a mesh. When the receiving end receives the defense beam, it enters the defense state. When any two adjacent defense beams are completely blocked and exceeded, the buzzer on the receiving end will generate a prompt tone, and the flashing alarm information output circuit on the receiving end will immediately transmit a wireless/wired alarm signal to the host to prompt illegal intrusion. It is a professional-grade equipment for fully sealing buildings to prevent intrusion. It is the first choice product for preventing entrances and exits such as home balcony windows.
The smoke detector is installed in the living room and can be equipped with both wireless and wired options. When harmful gases and smoke are detected, the smoke detector immediately emits a coded signal to the host. It is mainly used to detect fire and alarm in a timely and reliable manner.
The gas leak detector is installed in the kitchen. When it detects the leakage of harmful gases (such as gas, natural gas, liquefied gas), the detector immediately chirps and transmits a coded signal to the host at the same time.
Emergency button When an emergency occurs, the emergency button is pressed. At this time, the host receives the alarm signal and alarms. The alarm has an emergency button that can directly maintain contact with the community security center. An emergency button can be installed in the bedside study or even in the bathroom. In case of emergency
WhatsApp
