BL-E99 HD TFT smart home commercial alarm

Host function
This system can be armed according to the mode set by the owner. When the detector detects an intrusion signal and sends the alarm signal to the host, the host will process it and send the alarm address and category to the user's preset mobile phone number. SMS, and automatically dials the pre-set phone number for voice alarm and can conduct on-site call and intercom monitoring. In addition, users can remotely set the system by sending text messages to arm/disarm and other remote settings. The specific functions are as follows
◎Wired zone external interface, optional dry contact and wet contact
◎Can be connected to access control, can control group wireless home appliances
◎The host can preset a group SMS alarm number, and send group SMS to inform users of the alarm
br/> ◎The host can preset the group telephone alarm number, and the user can choose to monitor the scene when receiving the alarm
◎The group alarm center telephone number can be set to alarm the security management center
◎The display screen supports Chinese and English exchanges , built-in clock, signal grid display is intuitive and convenient
◎ Short message informs the user of power adapter power outage
◎ Built-in battery pack, the system ensures that normal operation will not be affected by power outage
◎ External interface mute/ Siren alarm conversion
◎ On-site intercom function, the person receiving the alarm can shout to the people on the scene
◎ Wireless remote control, stay-at-arms/out-of-arms/disarm or emergency alarm
◎ Scheduled arming, scheduled disarming
◎Supports arming/disarming mode SMS host keyboard remote control remote call center software control
◎The recording function can record voice for up to seconds.
◎The voice function can play the voice recorded by the user and the system voice
◎High-standard built-in antenna, the wireless signal will not be affected in any way
◎Passed multiple certifications and complies with safety standards and national standards
br/> Main technical parameters
Signal frequency/(quad-band) applicable to the world
Learning code wireless signal frequency wireless distance meters (open distance)
Data response time seconds (network normal state)< br/> Configurable wireless device capacity
Working conditions temperature～℃ Humidity without condensation
Standby current
Alarm power
Standby function
Alarm power
Adapter voltage.
Output power
Backup battery
Backup battery working time in hours
Dimensions (length) (width) (thickness)
Weight Packaging net weight.
◆Wireless door sensor
Power supply (built-in dry battery)
Static power
Transmitting current
Transmitting frequency
Transmitting distance barrier-free distance meters
Clutch distance mm
Working environment temperature ℃～℃ Relative humidity
◆Wireless infrared detector
Power supply (built-in dry battery)
Static electricity
Emission current
Transmission frequency
Transmission distance barrier-free distance meters
Detectable speed/second
Detection angle level and straightness
Working environment temperature ℃～℃ Relative humidity
◆Remote control
Power supply (built-in dry battery)
Quiescent current
Transmission current
Transmission frequency
Transmission distance barrier-free distance meters
Working environment temperature ℃～℃ Relative humidity
Host installation
Please prepare a mobile phone card before installation and use (if it is a new card, make sure it can make calls and send and receive text messages normally). Before installing the card, please turn off the power switch of the host and insert the prepared mobile phone card into the card holder of the host according to the direction. The installation is complete and you can start the phone for use.
The host should be installed in the center of the protected area as much as possible to achieve the best reception effect of all wireless detectors. The host can be fixed on the wall.
Electricity