Bailing BL-E99 home phone alarm host

System Introduction
The intelligent enhanced voice home/commercial anti-theft alarm system has the characteristics of practical functions, high cost performance, complete configuration and simple operation. This system uses microcomputer processing technology as the control core. Based on the market positioning of the alarm system, it has innovated a more humane voice prompt operation mode. When the alarm is issued, not only will a decibel alarm be sounded on site, but at the same time, it will automatically dial the owner's preset mobile phone number ( Telephone) to notify the owner, and at the same time satisfy the user's multiple functions such as emergency rescue, anti-robbery, anti-theft, anti-fire alarm, anti-gas leakage alarm, etc. Therefore, it is suitable for widespread use in households, factories, schools, shops, supermarkets, convenience stores, financial rooms, and urban security and anti-theft alarms in villas and residential areas.
Functional features
The system has a large defense zone capacity and is designed with a total of one defense zone
Intelligent voice operation prompts, voice reporting various working status of the system
Intelligent doorbell function, doorbell ringing is optional
Anti-malicious interference function, the host has the ability to automatically identify wireless interference. When the host automatically identifies it as an interference cracking signal, it will sound the siren
Anti-cracking function. After turning on this function, all wireless remote controls will not be able to disarm
Intelligent microcomputer automatically controls the dialing alarm, and can dial any different phone numbers to notify the owner of the alarm situation
Defense zone type programming: common defense zone, intelligent defense zone, alarm and emergency zone Discrimination zone, delayed zone, repeated zone, etc.
Keyboard remote control, remote control, phone call and alarm can all control and function the host.
The recording function can be erased multiple times per second, and users can record their own address and voice messages.
Remote setting operation method
You can use any phone to dial the host number. After the system detects the number of rings set by the user, it will automatically connect. After hearing the prompt tone, enter the password (the wrong password will result in two If the wrong password is entered more than three times, the system will be hung up. After entering the correct password, the system can be remotely controlled. After all operations are completed, you must press the keys to perform the operation and hang up
Press for on-site monitoring to sound the siren, and press to turn off the siren
Press arm and disarm
Press confirm and automatically hang up
If the password is wrong or there is no operation for seconds, it will automatically hang up
Each button can be monitored for seconds
What to do after receiving an alarm
When an alarm occurs, the host will automatically grab the line and dial the set phone number, and sound the siren according to the setting. If the host's phone is busy or cannot be connected
the system will transfer the next alarm number. , until the call is dialed and the host confirms. After answering the alarm call, the host automatically plays the recording, and the operation method is the same as the remote setting.
Electricity