Year1
- 处理水量：
- 15.62m³/h
- 风量：
- 9600m³/h
- 马达功率：
- 0.56
Product Features
The series of cooling water towers are made of high-quality
film. Its honeycomb fan pattern greatly enhances the cold and heat exchange capacity and can withstand high temperatures up to
℃, ensuring the best level of cooling performance of the water tower, and green and high-temperature resistant films (
℃) are available for selection
The fan is an axial flow fan, made of high-grade plastic or aluminum alloy, each The fans are strictly positioned and balanced by professionals before leaving the factory
All major metal accessories are made of thick steel from the original factory and are hot-dip galvanized and anti-rust to international standards. Stainless steel accessories are also available
The shell of the water tower is made of high-grade glass fiber that is resistant to acid and alkali corrosion. All pipes and water spray equipment are made of high-grade plastic. No lubricating oil is needed and it is durable.
Two design parameters
Standard working conditions are atmospheric Pressure
, inlet water temperature ℃
, outlet water temperature ℃
, design wet bulb temperature ℃
, that is, water temperature difference ℃
) medium temperature working condition inlet water temperature ℃
, outlet water temperature ℃
, design wet bulb temperature ℃
, that is, water temperature difference ℃
) Inlet water temperature ℃
under high temperature conditions, outlet water temperature ℃
, design wet bulb Temperature ℃
, that is, water temperature difference ℃
Three instructions for use
Environment selection
Avoid installing it in waterproof channels or high walls that easily reflect sound. It should be installed on the roof or in a place with good air circulation. place.
When two or more cooling towers are used together, attention should be paid to the spacing between towers.
It should not be installed in a place with walls on all sides or airtight, and attention should be paid to the distance between the tower body and the external wall.
Avoid installing in places with a lot of smoke and dust to prevent clogging of the film.
Keep away from hot places such as kitchens and boiler rooms.
Installation points
The foundation should be horizontal and not tilted, and the center line of the cooling tower should be perpendicular to the horizontal plane, otherwise the water distribution and motor operation will be affected.
For
the above cooling tower inlet and outlet pipes should be equipped with supports.
When two or more water pumps are shared, a balancing water pipe should be added between the basins.
Shock-absorbing connections should be used for circulating water connections.
The gap between the cooling tower fan blades and the tower wall should be consistent. The gap between the two sides should never be too different. If this phenomenon is found, it should be solved in time.
The motor and reducer should be inspected regularly, and the oil level of the reducer should be checked frequently.
Startup inspection
Whether all screws are tightened and whether there are any debris in the tower.
Whether the fan and sprinkler system rotate smoothly.
Check whether the power supply and motor voltage are consistent.
Whether the belt combination is installed correctly.
Open the water replenishing valve to completely fill the water basin and water pipe. The water level is lower than the full water pipe
.
When starting, turn on the water pump first and then the fan, check the wind direction and air volume, and make timely adjustments until the requirements are met.
When stopping, stop the fan first and then the water pump.
Operation inspection
Keep the water tower clean and conduct water quality treatment regularly.
After running for about
hours, the belt tension must be rechecked to ensure it is normal.
Gear reduction box oil level and lubricating oil must be replaced after running hours.
When the cooling tower is in operation, there should be dedicated personnel to manage it, always pay attention to changes in current and water temperature, and regularly inspect the motor reducer, water distributor, etc.
Four after-sales services
瀹嬩
In order to create a brand, improve corporate visibility and establish a corporate image, we are in line with the purpose of pursuing high quality and customer satisfaction
spirit, we solemnly promise to you with the principle of the best price, the most considerate service and the most reliable product quality
Operation training
瀹嬩
After three months of use, our customer service department will return to visit the equipment’s usage
瀹嬩
The equipment sold by our company has a free warranty period of one Years, during the warranty period, spare parts and maintenance are provided free of charge, but any abnormal damage to the equipment is not covered by the warranty, and the buyer should pay the cost of replacing spare parts.
瀹嬩
Debugging products for consumers according to consumer requirements, providing technical guidance on use and other aspects to ensure the supply of repair parts. Responsible for product life-long maintenance services
瀹嬩
Free Outside the warranty period, when the equipment is damaged, the buyer must pay for the replacement parts (priced based on material procurement cost)
瀹嬩
After receiving the customer’s call and
Equipment failure notice
, through remote maintenance, if the maintenance cannot be performed within the scope of Guangdong, it will arrive at the site for processing within
hours, and if it is outside Guangdong Province, it will arrive at the site for processing within
hours. .
瀹婩
You only need to call us or contact us in other ways, and we will solve the technical problems for you. We will provide you with the best service within hours!
WhatsApp
