Guangzhou sign embossed machine/shopping mall card embossed machine

Metal nameplate embossing machine
Metal nameplate embossed characters
Engraving effect
Way
Embossing characters on the metal nameplate, such as changing parameters model date batch number serial number serial number No. etc.
Typical Applications
Suitable for various equipment manufacturers, steel distribution departments and other units to produce machine signs.
Working principle
The alloy steel characters that have been heat-treated by high-frequency quenching are embossed with letters, numbers or graphics of a certain depth on the metal sign under the action of external force
The heat-treated steel character plate It can be rotated to the required letters or numbers, and the typeface can be easily replaced
The line spacing of the marking position is infinitely adjusted by a special mechanical mechanism
Dot
Small size, light weight, flexible operation, convenient printing, neat lines, uniform and clear font size Diverse and complete.
Built-in character code
Write English letters (number)~
Arabic numerals (number)~
Symbol (number
Special characters can be customized
Character
Height
Character size
The maximum is
The minimum is
*
.
Applicable workpiece
Machine nameplate Machine nameplate or
Metal sheet within
Thickness requirement
Within aluminum, stainless steel and tinplate.
Character selection
daisy character conversion
Character spacing
/>Determined according to the character size, the standard is
Operation mode
Manual
Number of embossed lines
According to the nameplate requirements.
Position indication
Indicator light or sample Card
Operation method
Insert the card to be imprinted into the card slot at the front of the card frame
, and use a card holder to clamp the blank nameplate in the card slot.
Turn the code selection wheel
to move the characters to be imprinted to the character pointer
position.
To select the upper and lower positions of the nameplate to be printed, gently push and pull the card frame
Select.
Select the left and right positions of the card. Move to the right to push the card frame directly
To move to the left, press the handle lightly
(about an angle) and then reset. The card frame
br/>You can move one space to the left. After the above steps, you can position the card at the position to be imprinted.
The card is imprinted from left to right, and it will automatically move to the left after each character is imprinted. Move one space to the left. If you need a space, press to proceed.
Imprinting character control handle
Press it all the way and reset it.
If the printed characters are dark or light and do not meet the requirements, It can be adjusted through the adjustment screw in the adjustment hole at the bottom of the machine.
Accumulation
Net weight of the machine