Jinjiang Bailang after-sales) Nanning Jinjiang Bailang air energy after-sales maintenance telephone number

Jinjiang Bailang after-sales) Nanning Jinjiang Bailang air energy after-sales maintenance hotline reservation hotline
How to use air energy water heaters correctly and safely
If you go out or are away from home for a long time, remember to cut off the power supply to prevent the water in the pipes from constantly circulating and heating, which is the main factor in power consumption.
Answers to Readers’ Questions
Can the gas water heater be moved and used? Yes. Just follow the operating instructions to drain the water, move it to the appropriate location, and then reinstall it according to the installation instructions and it can be used normally. Experts remind
that professionals are needed to move the machine.
What is the service life of the gas water heater? The panel is precision-machined with the above metal-type aluminum-plastic composite home appliance panel and will never rust. Compression
The unit adopts low energy consumption and high efficiency closed-type environmentally friendly refrigerant compressor
The compressor has a long service life and the insulation is a refrigerator foaming process. Polyurethane is molded and foamed in one time, and the insulation effect is excellent. Important components, such as water heater tanks, generally have a service life of up to several years.
Is the air-energy water heater noisy? Generally, air-energy water heaters use closed silent compressors and adopt sound-absorbing treatment inside, so the noise is relatively small
There is only a slight sound of fan air flow, and the noise decibel value
is about 10 decibels. Its working state is interval operation, the working time is short, and there will be a certain distance and barrier between the water heater and the bedroom, which will not affect consumers' life and rest.
Is the heat preservation effect of the gas-energy water heater good? In the absence of continued heating, when the ambient temperature is ℃, the temperature drops to ℃℃
during the day and to ℃℃ at night. The room temperature and ambient temperature will
fluctuate slightly up and down.
Put safety awareness first
Confirm the power used by electrical equipment
The main power supply must meet the power requirements of the equipment, and the electricity must meet the national civil/commercial use requirements. Otherwise, the unit will operate under overvoltage and undervoltage and be damaged, or even cause a fire.
Confirm the ground wire
Confirm whether it is properly grounded. If the grounding is not perfect, it may cause electric shock to personnel.
Confirm the leakage protection switch
Confirm whether a leakage protection switch with equal power is installed between the unit and the user's power supply, and the grounding performance is good. Failure to install a leakage protection switch
may cause electric shock or fire.
Ask professionals for installation
Please entrust professionals for installation. Installation by other people may result in imperfect installation, which may lead to electric shock or fire.
Confirm the installation location of the main controller
When installing the main controller, be sure to install it in a waterproof place, and the installation must be secure.
Confirm the correctness of the water pipes and wiring
When completing the water pipes and wiring of the unit, they must be checked before turning on the power supply and running the unit.
Emergency measures after water and power outages
When not in use in cold areas, please do not cut off water and power to avoid freezing the casing heat exchanger. If there is a power outage for a long time, please drain the water in the casing heat exchanger in time, otherwise it will cause the casing heat exchanger to freeze and damage, so that the unit cannot be used normally. Be sure to install a drain pipe for condensate water during installation to prevent a large amount of condensate water from flowing to the ground and causing large-area water accumulation during drainage.
Check the flow and pressure of the equipment's circulating water
When the equipment is in normal use, the flow and pressure of the equipment's circulating water must be ensured to avoid water shortage operation and unit protection.
Do not move the water temperature detector at will
The temperature detector must not be separated from the blind leg of the water tank temperature detection to avoid overheating of the unit heater and damage to the unit.
Do not spray flammable spray directly onto the hot water unit, otherwise it may cause a fire accident.
Sincerely welcome you!
Welcome to call our hotline, we will serve you wholeheartedly as soon as possible! !