Futian Huaqiangbei air conditioner repair, air conditioner disassembly and assembly, cleaning, refrigerating, and refrigeration

Shenzhen brand air conditioner repair There are many styles of air conditioners on the market now, and split air conditioners are one of the many styles of air conditioners. Shenzhen Midea Air Conditioning Maintenance, based on its summary of air conditioning maintenance in recent years, would like to share some experience with those who are new to the air conditioning maintenance industry. The disassembly and assembly of air conditioners is not as simple as you think, and it also requires a lot of skills. . Today, Midea Air Conditioner Repair (Talk about your own opinions on the disassembly and assembly methods of split air conditioners.

Shenzhen brand air conditioner repair and air conditioner installation steps

Determine the location of the indoor unit , drill holes in the wall to ensure that the hanging plate of the indoor unit remains level. After hanging the indoor unit, pass the pipe through the hole.

When installing the outdoor unit, ensure that the outdoor unit is also installed horizontally. The balance of the machine should be level with the ground. And the position of the outdoor unit should be determined according to the length of the indoor pipe.

Connect the high and low pressure pipes, open the high pressure valve first, and then loosen the lock nut of the low pressure pipe. (You can hear the sound of air coming out of the exhaust pipe. After a few seconds, tighten the lock nut, open the low-pressure valve, and connect the wires in order.

Turn on the air conditioner and observe whether the air conditioner can operate normally. , and check that the air conditioner is not cooling because it is deficient in fluorine.

Steps to disassemble the air conditioner


Collect fluorine. Unplug the power cord of the air conditioner, turn it on, turn on the refrigeration, and the compressor After work, close the high-pressure valve and run it for one minute, close the low-pressure valve, and stop.

Then disassemble the outdoor unit copper pipe joint, and disassemble the outdoor unit wire joint according to the order of disconnection.

Pass the removed copper wires and tubes through the holes into the house, and remove the indoor unit.



Precautions

When disassembling the unit , the fluorine from the air conditioner must be completely collected, and the air must be completely drained.

When dismantling the old air conditioner, due to the poor toughness of the copper pipe, it is easy to become a dead bend, so be careful.< br/>
When disassembling and assembling the air conditioner, pay attention to the level, firmness and no leakage of the air conditioner.

Different styles of air conditioners have different methods for disassembling and assembling the air conditioner. Yes, Shenzhen Midea Air Conditioner Repair has some opinions on split air conditioners. If you have anything else to know, you can find Shenzhen brand Midea Air Conditioner Repair.