Qinghai production and sales of electrician safety belts

Model electrician's safety belt defines protective equipment for workers working at heights to prevent falling injuries. It consists of straps, ropes and metal accessories, collectively called a safety belt. Safety rope defines the tether on the safety belt that protects the human body from falling. The hanging rope defines the rope used by the self-locking hook and must be hung in advance. Vertical, horizontal and tilt are available. The self-hook can move freely on the rope and can adapt to different working points. A buffer is defined as a device that can reduce the force on the human body and absorb part of the impact energy when the human body falls. The differential speed controller defines a box containing a certain length of rope. The rope can be pulled out at will during operation. When falling, the change in speed causes self-control. It is called speed differential automatic controller.
Definition of electrician’s safety belt
Protective equipment for workers working at heights to prevent falling injuries. It consists of straps, ropes and metal accessories, collectively called a safety belt.
Safety rope definition
The tether on the safety belt to protect the human body from falling.
Definition of hanging rope
The rope used by the self-locking hook must be hung in advance. Vertical, horizontal and tilt are available. The self-hook can move freely on the rope and can adapt to different working points.
Definition of buffer
When the human body falls, it is a device that can reduce the force on the human body and absorb part of the impact energy.
Definition of speed differential automatic controller
A box containing a certain length of rope. The rope can be pulled out at will during operation. When falling, the change in speed causes self-control. It is called speed differential automatic controller.
Electrician safety belt materials
Seat belts and ropes must be made of nylon vinylon silk material. Electrician fence poles can be made of ox leather. Metal fittings are made of ordinary carbon steel or aluminum alloy steel.
The rope is wrapped with a light leather strap made of vinylon or rubber.
Technical requirements for electrician’s safety belt
Appearance
The belt must be a complete piece
The part of the belt that touches the waist should be padded with soft material
The welder’s suspension rope must be fully padded The other hanging ropes are only partially covered with sleeves. The strand ropes of the hanging ropes without sleeves are not allowed to be elastic
Metal hooks must have safety devices
The surface of metal accessories should be smooth, free of pitting and cracks, and rust-proof Welding is not allowed except for adjusting rings
Two signs
Accessories should be marked with the manufacturer’s code
A colored line should be added to the entire rope to represent the manufacturer
The word Shande should be sewn on the body Trademark Certificate Verification
Three Dimensions Measurement
Belt Length ~ Width
Waist Length and Width
Total Rope Length
Belt Length
Four Metal Accessories
Sub buckle≧
Clips on chest and legs≧
Clips on chest and legs≧
Full hook small≧
Garden ring≧
Corner ring≧
Ring≧
Word ring≧
Five webbing breaking load
Belt≧
Rod strap≧
Belt≧
Belt≧
Chest connection strap≧
Breaking load of six safety ropes
Full rope≧