Epoxy floor paint manufacturer

>When the ambient temperature of the acceptance standard for epoxy floor paint is ℃, it should be fully dry the day after construction, that is, the hardness should reach about the level of complete curing
There should be no stickiness on the surface
The bubble flat coating type mortar type has no bubbles. Self-leveling allows one small bubble/square meter
Good leveling, no trowel marks, and large-area joints are basically flat
No floating and blooming, the color is uniform, and poles are allowed at large-area joints Inconspicuous color difference
No coarse impurities, but minimal defects caused by falling dust in the air are allowed
The floor surface should be flat and smooth, and the glossiness should meet the design requirements. High gloss, glossy and semi-gloss. ~ The flat coating type is glossy and the water type is semi-gloss ~ matte
The anti-slip surface effect of orange peel mortar should be obvious. , no volatile organic compound emissions, and is widely used in the coating of modern industrial floors.
Contact number