Jiangxi construction site mud dehydration separator

Company name Zhejiang Jinhua Shenzhou Centrifuge Co., Ltd.
Address No. Jinlong Road, Bailongqiao, Wucheng District, Jinhua City, Zhejiang Province
Inquiry phone number
Manager Liu
Office phone number< br/> Email@
Jiangxi construction site mud dewatering separator construction piling sludge dewatering machine latest selection quotation sludge dewatering system
Series horizontal spiral discharge sedimentation produced by Jinhua Shenzhou Centrifuge Co., Ltd. The centrifuge has reasonable product structure, advanced technology, fine production, great applicability for mud separation, and good separation effect.
The series of piling mud treatment devices are mainly suitable for large-diameter pile foundations and anti-seepage wall projects that adopt mud-solid wall circulation drilling technology in modern foundation engineering construction. Welcome to call us to discuss large-scale project cases //
Business consultation hotline, Mr. Liu, the technical guide, has on-site cases and can provide on-site videos. Welcome to consult.
Environmental Protection Market Analysis
Construction piling mud water is a suspended liquid containing a certain amount of fine mud particles in the water. The characteristics of the slurry depend on its composition and are related to the local geological conditions. It generally has the following characteristics and appearance It is earthy yellow, uniform and sticky, and does not stratify for a long time. The specific gravity of yellow sand has a mud content of ~, and the value is ~. These muds come from construction piling sand fields, tunnels, caves, mine tailings, etc.
Environmentally Friendly Treatment Methods
Early methods for treating mud included landfilling and natural drying. These primitive methods were expensive and low-efficiency. They were far from meeting the growing needs for mud treatment and became a problem for the normal construction of the project. difficult problem. Therefore, in recent years, a new process of vacuum suction filtration, filtration press and centrifugal separation has been introduced based on mud dehydration and drying treatment.
Relevant personnel conducted comparative tests on the above three methods [] and found that
the vacuum suction filtration method was less effective because the mud settled in the lower layer. When the vacuum was evacuated, the mud layer became denser and the water Difficult to aspirate.
The effect of the filter press method is acceptable, but it is considered that if it is used on site, a filter press will be required. However, the mud water has a high mud content and is not suitable for a filter press, so it is also difficult to use on construction sites.
The treatment effect of the centrifugal dehydration and drying method is much better than the above two methods. The centrifuge is closed and operates continuously automatically without the need for flocculation equipment. It is suitable for on-site construction environments and can fundamentally replace the current original and backward treatment methods. , improve processing efficiency, reduce processing costs, protect the urban environment, and achieve civilized construction on site. In addition, the high specific gravity of piling mud will affect the processing capacity of the equipment. During the use of the equipment, the uniformity of the feed should be maintained as much as possible. Before feeding, try to avoid too many coarse particles, which will increase the efficiency of the equipment!
Jiangxi construction site mud dewatering separator
The equipment can create the following advantages for you
The speed differential adopts multi-stage planetary gears, which has the characteristics of large speed ratio and large torque.
The wear-resistant spiral and slag outlet are welded with alloy rods imported from Germany, and a special wear-resistant sleeve technology is adopted.
Large diameter ratio: The large aspect ratio allows the suspension to stay in the drum for a long time, which can increase the processing capacity while ensuring the effect of the separation liquid.
The dynamic balancing of the small moving drum is carried out on a horizontal dynamic balancing machine. The spiral dynamic balance adopts a special spiral dynamic balancing device, which can achieve dynamic balancing on three sides and dynamic balancing of high-speed working speed. This can correct the winding of the spiral in real time and increase the stability of the spiral. Maintain good results for a long time.
The low-pitched cover adopts a double-layer design with a sound insulation layer, and the cover and bearing seat adopt a new sealing structure, coupled with precise dynamic balance, which significantly reduces the noise.
Large processing capacity: Due to the adoption of the new three-cone angle technology, the liquid pool is deepened, the straight drum is lengthened, the clear phase diversion hole is added to the spiral, and other structural improvements, the processing capacity of the new centrifuge is greatly increased. Higher processing capacity than similar domestic models