Henan Zhongwei Century JVSN63HY infrared dome network surveillance camera

Henan Zhongwei Century Infrared Dome Network Surveillance Camera Wang Li
Several Frequently Asked Questions about Infrared Dome Network Surveillance Cameras
After the network dome camera is used for a long time, there will be more or less fog inside the Million HD Network Camera , the main reasons for this phenomenon are that the sealing effect of the casing is not enough and the temperature difference is not taken into account when installing the network camera. When the infrared light starts to work, it will generate a lot of heat. At the same time, due to the insufficient heat dissipation effect of the casing, this will greatly reduce the service life of the camera. To solve this problem, you can consider making the casing of the infrared dome camera into multiple wire troughs. Helps dissipate heat. Zhongwei Century's Haiyan series hemispheres and other products have multiple wire grooves and can also be rotated in all directions, and the effect is quite good.
Color distortion and color cast of infrared dome camera
It may be that the white balance switch is not set properly, or the ambient lighting conditions change too much. At this time, you should check whether the switch setting is in the right position, and find ways to improve the lighting of the environment. condition. After the camera is connected, right-click on the software to remotely set, stream management, and image adjustment to operate the camera's white balance and other functions that can increase the camera effect.
The image of the night vision infrared dome camera is normal during the day but turns white at night
This phenomenon is generally caused by the reflection of infrared light due to the reflective objects in the environment where the machine is used or when it is used in a small space. To solve this phenomenon first, You should determine whether there are reflective objects in the use environment, improve the use environment as much as possible, and make the environment around the camera as consistent as possible. Secondly, check whether the effective infrared distance of the machine corresponds to the actual use distance. If a long-distance infrared machine is used in a small space, the machine image will appear white due to excessive infrared light. Generally speaking, you can choose a lens that is about 1 meter long. If you choose a lens that is more than 1 meter long, the effect will be better.
Henan Zhongwei Century Infrared Dome Network Surveillance Camera