Hello and welcome toTitker Trade Network!
生产、加工、销售:清洗设备、电镀设备、水处理设备、废气处理设备、风机及暖通设备、过滤设备、水泵及零部件。销售:环氧地坪材料、PCB电

free member

Japan PANWORLD Expo magnetic pump 200ps-f

价格 1800.00元/台
total supply
100 台
MOQ
1 台
brand
世博
area
JiangsuSuzhou City
Delivery period:
Shipped within 3 days from the date of payment by the buyer
Buyers are still looking
  • 1
  • 2
  • 3
Products Recommended

Shop information

area:Jiangsu Suzhou City

Member level:corporate memberYear1

identity:   

Already paid:0.00 yuan deposit

my badge: [Integrity File]

online service:

Business card

苏州郎诺机电设备有限公司

Applets
【Kind tips】When you call, please mention that you saw us on Titker Trade Network, thank you.

Other products

Product Details
200ps-f:
26*26
Magnetic pump usage knowledge: Because the cooling and lubrication of the bearings depend on the transported medium, it is absolutely prohibited to run without load, and at the same time, avoid running without load caused by restarting after a power outage during work.
2. If the conveyed medium contains solid particles, a filter should be added to the pump inlet. If it contains ferromagnetic particles, a magnetic filter should be added.
When the third pump is in use, the ambient temperature should be less than ℃, and the temperature rise of the motor should not exceed ℃.
4. The transported medium and its temperature should be within the allowable range of the pump material. See the attached table for details. The operating temperature of the project is ℃, the operating temperature of the metal pump is ℃, and the suction pressure is not greater than the maximum working pressure, the density is not greater than /, and the viscosity is not greater than /, and does not contain hard particles and fibers.
5. The conveying liquid is a medium that is prone to precipitation and crystallization. It should be cleaned in time after use and the accumulated liquid in the pump should be drained.
After six hours of normal operation of the magnetic pump, the wear of the bearings and end moving rings should be disassembled and the wearing parts that should not be reused should be replaced.
What is a magnetic drive pump?
The abbreviation of magnetic coupling transmission pump was first successfully developed by a British company in 2000. A few years later, West Germany also developed successfully. The first two companies to use magnetic drive pumps were Imperial Chemical Industries of the United Kingdom and Bayer Chemical Company of Germany. The original purpose of developing magnetic drive pumps was to protect the safety and health of personnel engaged in chemical, nuclear power, national defense and other industrial sites. After the mid-2000s, the technical level of magnetic drive pumps has been greatly improved due to the development of new generation permanent magnets and silicon carbide bearing technologies such as rare earth cobalt and the most powerful neodymium iron boron. According to foreign samples and literature, the flow rate/lift of the magnetic drive pump can now reach the medium temperature range of ℃ ~ ℃ viscosity limit ~ the content of abrasive solid particles in the medium can reach up to 100% by weight. After taking special measures, the pump It can transport slurry containing insoluble solid matter, and the diameter of the solid matter can reach up to the system pressure. The magnetic drive pump is also suitable for high vacuum conditions where mechanical seals are difficult to handle. These technological breakthroughs and other improvements have resulted in astonishing improvements in the reliability and economy of magnetic drive pumps. A survey of the availability and ease of repair of magnetic drive pumps and mechanical seal pumps shows that the damage and failure rates of sealed pumps are significantly higher than those of magnetic drive pumps. For example, the average life of a mechanical seal on a thermal fluid pump at ℃ is a month, while a magnetic drive pump can run for many years, and the only maintenance required is normal lubrication of the external bearings of the pump and motor. The extensive experience gained in the chemical industry has led to the conclusion that magnetic drive pumps have developed into the most economical solution in many process installations. Therefore, the increase in the use of magnetic drive pumps is not only a reliable environmental factor, but also an economic factor that greatly reduces operating and maintenance costs. Its application scope has expanded from transporting hazardous liquids and precious liquids to general pump applications that require long life and low maintenance. For example, magnetic drive pumps are used on ocean-going ships to transport cold water for air conditioning systems due to high maintenance costs. The use of magnetic drive pumps has grown dramatically in the last decade and has become a common fixture in a variety of applications. Magnetic drive pumps can now cover all applications of sealless pumps.
The magnetic drive pump utilizes the characteristics of magnets that can attract ferromagnetic substances and the magnetic interaction between magnets or magnetic fields. Non-ferromagnetic substances do not affect or rarely affect the magnitude of the magnetic force, so they can pass through non-magnetic materials without contact. The conductor isolation sleeve performs power transmission, and this transmission device is called a magnetic coupling. The motor is connected to the outer magnet through a coupling, and the impeller is connected to the inner magnet. There is a fully sealed isolation sleeve between the outer magnet and the inner magnet, which completely separates the inner and outer magnets so that the inner magnet is in the medium. The rotating shaft of the motor directly drives the impeller to rotate synchronously through the attraction of the magnetic poles between the magnets. Its main advantage is that the transmission shaft does not need to penetrate the pump casing, but uses the magnetic field to transmit torque through the air gap and the thin-walled isolation sleeve to drive the inner rotor, thus fundamentally eliminating the leakage channel of the shaft seal and achieving completely sealed transmission. There is an overload protection function during power operation. Except for the high requirements on magnetic materials and magnetic circuit design, the technical requirements for the rest of the magnetic drive pump are not high, and the maintenance and repair workload of the magnetic drive pump is small. Its main disadvantage is that its efficiency is lower than that of ordinary centrifugal pumps. It has higher material and manufacturing requirements for the isolation sleeve to prevent single-sided leakage. Due to the limitations of materials and magnetic transmission, magnetic drive pumps are generally only used to transport media below ℃ in China. The wear resistance of the isolation sleeve material is generally poor, so the magnetic drive pump is generally used to transport media that does not contain solid particles. The coupling alignment requirements are high. Improper alignment will cause damage to the bearing at the inlet and prevent single-sided leakage. Wear of the isolation sleeve.
"Japan PANWORLD Expo magnetic pump 200ps-f"Related Products
Related categories
plastic robot oil equipment Packaging Equipment Packaging forming machinery Printing Equipment Prepress processing equipment Post-press processing equipment agricultural machinery Food and beverage processing equipment Sewage treatment equipment Cleaning and cleaning equipment energy saving equipment Air purification equipment Noise reduction equipment garbage incinerator Generator/generator set electric motor Low voltage electrical appliances High voltage electrical appliances Distribution and transmission equipment Textile equipment and equipment Leather processing equipment Paper processing machinery Shoemaking machinery Painting equipment Papermaking equipment and accessories Clothing machinery and equipment furniture manufacturing machinery Craft gift processing equipment Ceramic production and processing machinery Computer product manufacturing equipment Home appliance manufacturing equipment Toy processing equipment Other industry-specific equipment machine tool valve Pump Transmission Parts industrial belt Filtration equipment filter material Bearing spring Fasteners/connectors Seals Mold Tools/fixtures Pneumatic Components Hydraulic Components Machine tool accessories Fans and exhaust equipment Compression equipment Compression equipment accessories Reducer/speed changer internal combustion engine Testing Machine Welding materials and accessories brake Welding and cutting equipment Welding auxiliary machine Engineering machinery/construction machinery Mineral processing equipment Smelting equipment Metal forming equipment Electronic product manufacturing equipment Industrial control systems and equipment Electric heating equipment Commercial special equipment Financial special equipment hotel equipment Industrial lubricants 换热、制冷空调设备 Industrial boilers and accessories workshop equipment 建材生产加工机械 gas equipment Casting and heat treatment equipment Non-destructive testing instruments Refrigeration equipment Rubber machinery Conveying equipment Mining loading and unloading equipment Mining conveying equipment Mining construction equipment Inventory chemical equipment Crystallization equipment Mixing equipment Chemical experimental equipment Chemical equipment accessories Chemical pipelines and accessories Chemical molding equipment Complete sets of chemical equipment Drying equipment Industrial humidifier Crushing equipment Separation equipment Mechanical measuring instruments reaction equipment Geological and mineral survey equipment Mass transfer equipment heat transfer equipment Storage and transportation equipment glass machinery Second hand machine tools second hand boiler Second-hand construction machinery Inventory equipment and industrial supplies Hydraulic machinery and accessories Ironing and washing equipment
Related Information
Jazz force 100QJ1.5 stainless steel deep Jazz force 100QJ3 stainless steel deep w Jazz force 100QJ4 stainless steel deep w Jazz force 100QJSP14 stainless steel dee Jazz force 100QJ8 stainless steel deep w Jazz force 100QJ6 stainless steel deep w Jazz force 100QJ10 stainless steel deep Jazz force 100QJSP2 stainless steel deep Jazz force 100QJSP3 stainless steel deep Jazz force 100QJSP5 stainless steel deep Jazz force 100QJSP8 stainless steel deep Jazz force 4DC2 solar submersible pump p Jazz force 4DC3 solar submersible pump p Jazz force 4DC5 solar submersible pump p Jazz force 100QJ16 stainless steel deep
Disclaimer

The information/pictures/parameters, etc. displayed on this webpage about【Japan PANWORLD Expo magnetic pump 200ps-f】are provided by member【苏州郎诺机电设备有限公司 】,By Titker Trade Network members 【苏州郎诺机电设备有限公司 】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.

If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!

Titker Trade Network