The preferred long-cylinder dryer for mixer processing of drying materials

The first choice for drying materials processed by a mixer is a long-cylinder dryer where the materials are fully mixed. This kind of mixer has difficulty in stirring and rotating, consumes a lot of power, and the materials at the four corners of the square casing are easy to arch. It is one of the more advantageous products among current mixing equipment. It is a continuous mixing system designed to meet the characteristics of continuous batching in the volumetric batching chamber. The materials from the impeller-type volumetric batching machine are evenly fed to the mixing wheel of the putty powder mixer. The high-speed rotating mixing wheel will mix the materials. The flow is folded vertically and then projected in a tangent arc shape, and the incoming material flows are gathered to the next mixing wheel. Sugon Heavy Industry Dry Powder Mixer is composed of a base column worm gear It is composed of reducer, planetary gear transmission, mixing blade, mixing pot, electric motor and electrical control system. The dry powder mixer is composed of a transmission system, which is composed of a machine base or a box reducer, a column gear box, a mixing blade, and a mixing pot. Motor electrical control system and other components. The column is a square simple casting, the lower end of the column is fixed on the base with screws, and the two-speed motor is fastened on the upper surface of the column with screws. The right side of the column is processed with a dovetail groove. The dovetail groove matches the sliding plate. There is a convex shoulder in the upper hole of the sliding plate, which closely matches the spiral groove of the pot base. The stirring pot lifting mechanism is installed inside the stand, and the electrical control components are installed on the inner side of the panel and fixed on the side of the stand.