Features of Tianjin Zhonglan ZL500Q800 mining pump supplied

Brand

Model Medium Blue

. Brand medium blue. Type deep well submersible pump. Material cast iron. Drive mode is electric. Principle centrifugal pump. Purpose submersible pump. Pump shaft position neutral impeller. Multiple levels of numbers. Performance and corrosion resistance. Flow


Lift


Speed

Suction diameter

Discharge diameter

Model

Thick and short mining submersible pump]
Series mining submersible pump
Product Overview Zhonglan independently developed
The reason why mining submersible pump When high lift and large flow cannot be achieved, the main reason is that the axial force cannot be overcome, which means that the thrust bearing of the motor cannot withstand greater thrust, so large flow and high lift cannot be achieved. In order to better solve the above problems, Tianjin Zhongzhong The technical department of Blue Pump Industry has devoted itself to researching a new type of stubby mining submersible pump.
The outer diameter of the pump for deep wells,
the lift can reach
meters, and the flow rate


is small. Because the axial force is eliminated, the solid performance is stable, low noise and long life
Mining pump outer diameter
, flow
square head
meter flow
square head
It can be done even with rice. The appearance is stubby and durable
Advantages
This type of pump has no axial force, so the flow head can be greatly increased, expanding the range of choices, meeting the needs of deep mine resource mining and drainage, and eliminating the need for axial force For the purpose of automatic balancing, it has low noise and long life. For example, lifts of
multi-meters and
meters of lift can be achieved, and the operation is very stable.
Pump outer diameter
The height of the water pump is short, and the height of a single pump is between
meters. Especially suitable for use in mine shafts, tunnels, slope mines, and can be used both vertically and horizontally!
If the water quality is clear and the average life span is more than
years, user feedback will be good. Well received and affordable.
The biggest feature of this mining submersible pump is that it is short and thick, making it easy to transport and install. It has completely changed the situation in the submersible pump industry that all well-used series have been used to replace mining pumps. It has filled a gap in the domestic submersible pump industry. Blank is an ideal tool for mine drainage rescue.
Every pump is tested when it comes out. To this end, the company specially spent 10,000
to build a large-scale water pump test bench to ensure product quality.
Required use
★ Thick and short, large flow and high lift, no axial force, easy to transport. Suitable for mines
★ Extracting groundwater from deep mines can be used for drainage at rescue sites in gold mines, silver mines, iron mines and coal mines.
★ This product has a small flow and high head submersible pump such as
m3 head and power of
. It not only saves energy, but also solves the problem of underground drainage in mines.
★ The motor water pump body is submersible and operates in water. It is spark-free and explosion-proof, safe and reliable.
★ There are no special requirements for well pipes, as long as the water pipes can withstand the corresponding pressure.
★ It is easy to install, use and maintain. It occupies a small area and does not need to build a pump room.
Usage conditions
★ Pumping medium is similar to clean water, with solid content and specific gravity not greater than
liquid
★ Medium temperature for ordinary pumps
°C, hot water pumps have the highest temperature
℃
★ Medium
Value
To
★ The required frequency of the power supply is
Customizable rated voltage
]
Power supply
/>Technical parameters
★ Flow rate range
to
cubic meters
hours
★ Lift range
to
meters
★ Power Range
to
two-stage speed motor, four or six-stage motor can be customized
★ Speed

two-stage speed motor
★ Optional materials
/
Tin Bronze