Anti-overflow skirt for power plants_Anti-overflow skirt for cement plants

Anti-overflow skirt for power plants Anti-overflow skirt for cement plants
The anti-overflow skirt of the guide trough has a double-layer structure and is installed on the lower edge of the belt conveyor guide trough through a set of quick pressing devices for transportation. Sealing between belt and guide trough. Double-layer sealing, the inner layer isolates materials from spilling, and the outer layer suppresses dust flying. The polyurethane wear-resistant layer is compounded in the parts that are in contact with the belt, which has a long service life and does not damage the belt. Quick clamping device makes installation and adjustment convenient and quick.
Installation of anti-overflow skirt
Installation instructions: Clamps are used in conjunction with angle aluminum, and two sets of clamps are used per meter. The height of the anti-overflow skirt can be adjusted appropriately according to the actual size of the guide trough.
Production capacity type anti-overflow skirt
Type anti-overflow skirt
Quickly fix the skirt through angle aluminum clamps
Angle aluminum is pressed and formed in one go, and the material is all aluminum. It looks beautiful and does not rust. It is a round column that is locked in the holder and will not fall off.
The base of the holder is welded to the outside of the side of the guide trough, and the slideway goes deep into the base, allowing the holder to move appropriately left and right along the base.
Manually rotate the compression handle, and push it up and down until it is appropriate. This can apply enough pressure to the corner aluminum to maintain the position of the skirt board, and the compression handle will not loosen and fall off.
The holder is made of hot-dip galvanizing, which is light in weight, has good anti-corrosion performance and does not rust.
The fastening bolts are made of stainless steel and will never rust. They are suitable for use in dark, humid and even short-term water flushing environments.
Except for the first installation, the holder base needs to be welded, the rest of the process and subsequent replacement of the skirt do not require the use of any tools, and installation and disassembly are extremely convenient and quick.
Type anti-spill skirt Polymer anti-spill skirt High wear-resistant anti-spill skirt Type anti-spill skirt Long tail anti-spill skirt Short tail anti-spill skirt Belt machine anti-spill skirt Flat type anti-spill skirt Plate guide trough skirt belt conveyor baffle anti-spill skirt installation anti-spill skirt price size
anti-spill skirt rubber anti-spill skirt Jining anti-spill skirt polyurethane anti-spill skirt Guolong anti-spill skirt
Guide trough anti-overflow skirt
Double-layer composite anti-overflow skirt
Clamp anti-overflow skirt holder
Contact Wang Jing
Mobile phone< br/> Telephone