Year1
- 规格：
- 长230mm*高200mm*厚136mm
- 网址：
- http://shop116384826.taobao.co
- 重量：
- 4.5KG
The pump body design adopts a specially lengthened pump body to eliminate water leakage.
The water flow sensor pump body has a built-in water flow switch design, which is convenient and energy-saving.
Enjoy the comfort of hot water as soon as you turn on the faucet, no need to wait.
The water temperature can be seen at any time on the normal temperature display.
Beautiful appearance, white anti-rust paint box.
Stable performance and multiple tests before leaving the factory to ensure product quality.
The low-noise design adopts aerospace friction technology and is less noisy than similar products.
The high temperature resistant design circulation system can be used in high temperatures and has a long service life.
The dry-wearing resistant design system can continue dry-burning for hours without water.
Automatic detection function The computer board has an automatic detection function to check the working status of the machine at any time.
The delay time setting can set the working time according to the actual length of the household water pipe to avoid waste.
Start-up delay water flow sensor starts to adjust the start-up sensing time according to the water pressure
Water flow interval start can set the interval between each start time according to your own living habits
Accurate temperature The set sensing temperature difference can be set to degrees at will.
Advantages of having a return pipe
If there is a return pipe, we will install a check valve at the connection between the return pipe and the cold water pipe. When the return water system is working, the water supply in the cold water pipe is mainly through the return pipe. The water pipes are provided, so if the machine works for a little longer, you don’t have to worry about the water in the hot water pipe running into the cold water pipe, because the hot water in the cold water pipe reaches the water return device of the machine. When the machine's temperature probe senses hot water, the machine stops working, so that when cold water is used in the wash basin at home, hot water will not come out.
Disadvantages of no return pipe
During installation, we will install the check valve at the connection between the hot water pipe and the cold water pipe under the wash basin at the farthest end of the water heater. In this way, if the machine works a little longer This will cause that when we use the cold water from the farthest wash basin, a little hot water will be released. Because the machine works for a little longer, the hot water circulated by the machine will flow to the cold water pipe through the check valve. In this way, when we install the check valve wash basin, when we use cold water, a little hot water will come out. This disadvantage can also be reduced or avoided by setting the time of the machine to release hot water. After several debugging, Generally it can be solved.
Chongqing Wilo circulating pump quotation
WhatsApp
