Supply of waste plastic granulator series products

Linyi Hengda Machinery Factory is a leading enterprise in the research, development, production and sales of plastic pellet machines in Shandong. The equipment quality and manufacturing process have reached the domestic leading level. The horizontal dryers produced by it are upgraded to automatic dryers. Specific steps for using a plastic granulator to process waste plastic
1. Turn on the power in sequence, set the temperature and pay attention to whether the heating is normal.
2. Clean the hopper and other units, as well as the inlet and outlet pipes, and check the oil level and lubrication status of each gear oil, machine oil, and high-temperature butter. The gear oil of a new machine should be replaced at least once every six months, and lubricating oil should be added to the active parts at least once a week.
⒊When the temperature is close to the set temperature, prepare the materials and start the main motor in sequence.
⒋After the extrusion is in place, the temperature of the machine must reach the set temperature, clean and process the extruder screw and barrel, and install the die head.
⒌The above operations start the operation of all the fan vibrating screen granulator hosts in order.
⒍Adjust the granulator during normal granulation and use variable frequency speed adjustment to adjust the granule size. The screw must allow the granulator to stop before discharging.