Cross-buckle scaffolding-Cross-buckle scaffolding

The cross-buckle scaffolding of Hualiang Construction Equipment Factory, Taocheng District, Hengshui City is the core component of the wheel-buckle multi-functional scaffolding, which is composed of wheel-buckle horizontal plug steel pipes.
A wheel buckle is welded to the vertical pole every other time, and a horizontal plug is welded to each end of the horizontal pole. When connecting, insert the horizontal plug at the end of the horizontal pole into the corresponding hole on the wheel buckle. Due to the design Features: Just hit the horizontal plug with a hammer to lock it. When a load is added to the cross bar, the locking is more reliable. Four horizontal bars are plugged into each wheel buckle at the same time, and the four horizontal bars are.
Its advantages are as follows
In terms of simple arch construction speed, fastener-type steel pipe scaffolding is used to build the sky. Bowl buckles are used to build the sky, and wheel buckles are used to quickly disassemble the sky. According to the actual project, on average, the wheel buckles need less time. About one-third of total labor.
The bearing capacity of bowl-buckle scaffolding is twice that of fastener-type steel pipe scaffolding, and wheel-buckle quick-release scaffolding is twice that of fastener-type steel pipe scaffolding.
In terms of stability, the fastener type bowl buckle type and wheel buckle type are successively enhanced.
Only the upper bowl of the upper bowl buckle for material storage and transportation is a movable part, while the wheel buckle has no movable parts. No issues with missing fasteners.
The rental fee is generally RMB/ton/month on average. The round deduction is RMB/ton/yuan.
In terms of the amount of steel used, wheel buckles are the least, followed by bowl buckles, and steel pipes are the most.
Mobile phone contact number: Ms. Zhao
Email@