Tear-proof PVG conveyor belt whole core flame retardant conveyor belt

The whole core flame retardant conveyor belt is referred to as the conveyor belt
Features
The belt core adopts
Metal spiral mesh integral belt core, which is resistant to burning and high temperature, and is resistant to puncture and tear. Elongation is small, and the interlayer bonding strength is high. Good channeling properties. Vulcanized Joint Efficiency Joints are quick and easy to operate. Among them, the use temperature of metal mesh core high temperature resistant conveyor belt is ℃~℃
The use temperature of metal mesh core burning resistant conveyor belt is ℃
~℃
The metal mesh core high temperature resistant conveyor belt is used in different It has good performance when used at any temperature. The metal mesh core electronic weighing belt endless belt has the characteristics of not deflecting, not elongating, and the joints will not disconnect. It is better than other endless belts. The metal mesh core has excellent tear resistance and is an anti-corrosion belt. The preferred object for tearing conveyor belts is the metal mesh core oil-resistant, acid-alkali-resistant conveyor belt joints which have the same lifespan as the belt body and should be given priority.
Product Specifications
Specifications





Longitudinal full thickness tensile strength

< br/>


Metal mesh belt core thickness





Recommended upper cover thickness< br/>




Recommended coating thickness





/> Covering layer and core viscosity strength
Normal temperature

℃

Minimum roller diameter of conveyor





Tape width

Metal reinforcement layer A metal braided reinforcement layer is set between the upper covering glue of the conveyor belt and the fabric core, so that the conveyor belt body can be protected from the impact of the material. Has good cushioning on impact. The carrying capacity of the conveyor belt is increased, the dimensional stability and runnability are enhanced, and the transverse rigidity of the conveyor belt is enhanced, which effectively solves the problem of longitudinal tearing due to lack of protection between the transverse directions of the fabric core conveyor belt.
The advent of this new product technology demonstrates our company's strong strength in new technology research and development. Today, with the rapid development of science, only by accelerating investment in new technologies and maintaining product upgrading can we remain invincible in the increasingly competitive market.
Qingdao Jiaoliu Special Rubber Tape Technology Department
It is made by impregnating paste and vulcanizing. The traditional whole-core flame-retardant conveyor belt consists of three parts: upper and lower covering rubber layers and the whole belt core.
The whole-core flame-retardant conveyor belt has the characteristics of high strength, large transportation volume, and strong transportation balance. At the same time, the product has good flame retardancy, anti-static, impact resistance, anti-wear, anti-corrosion and many other properties. It is widely used in underground transportation in the coal mining industry, transportation of materials in the metallurgical industry and the chemical industry. It has the characteristics of wear resistance, antistatic, waterproof, flame retardant, high strength, excellent safety performance and low cost compared with other flame retardant conveyor belts.
However, the whole-core flame-retardant conveyor belt also has shortcomings that cannot be ignored. For example, there are technical problems such as poor adhesion between the belt core and the upper and lower covering adhesive layers, which are easy to fall off and have a short service life. The patent certificate number of the anti-tear rubber surface whole-core flame-retardant conveyor belt for underground mines, independently developed by Qingdao Jiaoliu Rubber Belt Co., Ltd., came out on yr, month, day. Its structure is composed of four parts: an upper and lower covering rubber layer, an integral belt core, and a high-strength anti-tear layer. Mr. Ding Zhongmin, Chairman of Qingdao Jiaoliu Special Rubber Belt Co., Ltd., led the technology-driven Jiaoliu people to pass dozens of tests and overcome numerous technical difficulties, and finally successfully developed the anti-tear rubber surface whole-core flame-retardant conveyor for underground mines. belt, filling the gap in the rubber conveyor belt industry at home and abroad. This patent not only solves the shortcomings of the traditional whole-core flame-retardant conveyor belt, which has poor adhesion between the core and the upper and lower covering adhesive layers and is easy to fall off, and has a short service life, but also effectively increases the flexibility of the belt body, allowing the conveyor to The selection of a smaller roller diameter improves the flexural performance and grooving performance, thus greatly improving the conveying efficiency.
Qingdao Jiaoliu Special Rubber Belt Co., Ltd.’s patent on the anti-tear rubber-faced whole-core flame-retardant conveyor belt for underground mines can be called a great initiative in the conveyor belt industry at home and abroad. It not only shows the strong technical strength of Qingdao Jiaoliu Rubber Special Belt Co., Ltd., but also shows the working attitude of Jiaoliu people to bravely climb the technical peak, injecting new ideas for our Jiaoliu brand conveyor belts to stand in the forest of conveyor belts in the world. of vitality, new vitality.