Exclusive distribution of Qingdao SKF angular contact ball bearings SKF bearings original quality 7012C

Exclusive distribution in Qingdao
Angular contact ball bearings
Original quality bearings
Angular contact ball bearings can bear both radial load and axial load. Can work at higher speeds. The larger the contact angle, the higher the axial load capacity. High-precision and high-speed bearings usually have contact angles in degrees. Under the action of axial force, the contact angle will increase
Double row angular contact ball bearings can withstand large radial loads, mainly radial and axial combined loads and moment loads, limiting both aspects of the shaft. Axial displacement. The tiltability between the inner and outer rings of double-row angular contact ball bearings is limited, and the allowable tilt angle depends on the internal clearance of the bearing, the size of the bearing, the internal design and the force acting on the bearing. and torque, while the maximum allowable inclination angle should ensure that excessive additional stress does not occur in the bearing. If there is an inclination angle between the inner and outer rings of the bearing, it will affect the life of the bearing, reduce the operating accuracy of the bearing, and increase the operating noise. Double row angular contact ball bearings generally use nylon cages or brass solid cages. When installing double row angular contact ball bearings, attention should be paid to the fact that although the bearings can withstand bidirectional axial loads, if there is a gap for ball installation on one side, care should be taken not to allow the main axial load to pass through the groove on the side with the gap. When using the bearing, care should be taken to ensure that the raceway on the side without the ball filling gap bears the main load