Diamond saw blade analysis of stone saw blade usage requirements and costs

Analysis of the requirements for using stone saw blades is as follows
To increase the yield rate and reduce unnecessary wear of the saw blade, please pay attention to the placement and reliable fixation of the blocks. See Stone Mall for details.
During cutting, sparks are generated due to the strong impact and friction between the cutter head and the stone, which requires sufficient cooling water for cooling. Insufficient water will cause burnt damage to the cutter head, so sufficient water supply must be ensured continuously. See Stone Network for details.
Add lubricant according to the amount. Adequate lubrication can reduce friction, reduce noise, improve productivity, and extend the service life of the saw blade.
When cutting stones of different materials, please adjust the sawing depth and sawing speed in a timely manner according to the changes in the main motor current.
During the cutting process, pay attention to changes in sawing sound and current at any time. If there is any abnormality in the diamond saw blade, it should be eliminated in time.
Measure the quality of the sawn rough boards, and timely investigate and deal with the influencing factors based on the degree and quantity of the rough boards that are out of tolerance.
When storing the lower saw blade, in order to reduce deformation, it should be hung vertically.
It has been twenty years since the emergence and application of diamond saw blades in our country. Twenty years. The price of diamond saw blades has dropped rapidly at an alarming rate, reaching an incredible level. This downward trend has not slowed since the turn of the century. At present, there are still big differences in diamond saw blade prices across the country. The lowest prices can be found in Shandong and Fujian markets. Taking circular saw blades as an example, the price of cutting Jinan Qing in Jinan, Shandong is between ~ and zero, and the price of cutting Wulian in Wulian market is between The minimum cost of a cutter head is three yuan, and the cutter head for cutting Fujian granite black is more than one yuan. This has caused confusion among the majority of diamond saw blade manufacturers. To what extent can the price of diamond blades be reduced?
Diamond Saw Blades
Since the beginning of the year, the market situation has undergone new changes. First of all, look at diamonds. Although Our country's current diamond output ranks first in the world. The actual output has exceeded consumption and is in a state of oversupply. However, there are still investors placing heavy bets on it. This strong competition must lead to a decline in diamond prices. Secondly, due to the popularization and use of powdered catalysts, diamond production has increased and unit price costs have decreased, resulting in a decrease in diamond prices. But the good times don't last long. Since the beginning of this year, the price of the main raw material for diamond production has increased. The price of the main raw material for hammers has increased by 100%. Coupled with the increase in energy prices, these factors will inevitably lead to an increase in diamond prices. , but in fact it is difficult for diamond prices to rise, which depends on the technical level and management level of each manufacturer. Generally speaking, the price of diamond will not fall anymore, and will rise steadily, but I am convinced that some diamond manufacturers will go bankrupt again!
As the second cost of diamond tool head production, diamond powder The price started to rise in 2018, and the increase this year has been even more astonishing. Take tungsten carbide as an example. The original high quality was RMB/year, and now it is RMB/, which has almost doubled. Therefore, the price of metal powder for each set of cutter heads will probably increase by ~ Yuan, while the original profit from each set of cutter heads was only about RMB. Therefore, it is a reversible fact that the price increase of metal powder has increased the cost of diamond cutter heads.
Hubei Yintian Saw Industry Co., Ltd. specializes in the production of diamond saw blades, granite saw blades, marble saw blades, and diamond cutting tools. It has a number of invention patents and new patents and is a national high-tech enterprise. If you are interested in our stone cutting sheets or have any questions, please click on the online customer service on the right or call us, we will serve you enthusiastically!