FS external formwork equipment

规格：

可定制

型号：

各种

Ningjin Xinze
Exterior wall insulation board equipment Exterior wall insulation board equipment safety operating procedures
Insulation materials
Select the board as the insulation layer material of the composite insulation exterior template. The thermal conductivity of the board is small, the compressive strength and impact resistance are high, the water absorption rate is low, and the aging resistance is excellent. It is currently a better lightweight insulation material.
Condensing material
Ordinary Portland cement is selected as the main cementing material for bonding the reinforcing layer, the bonding layer, the insulation transition layer and the reinforcing ribs. Ordinary Portland cement has wide sources, low price, good water resistance, high strength and excellent durability.
Materials
Select artificial sand and natural sand mixed in a certain proportion as the bonding reinforcement layer, bonding layer, insulation transition layer and sand for reinforcing ribs.
Vitrified microbeads
Select vitrified microbeads as the lightweight filling material for the thermal insulation transition layer.
Powder
Select the type of rubber powder produced by the German Wacker Company to improve the bonding strength, water resistance and other properties of the polymer mortar.
Additives
In order to effectively improve the physical and mechanical properties of each layer of composite insulation, water-reducing agents, waterproofing agents, polymers and other admixtures are also added.
Alkali fiberglass mesh
Use alkali-resistant fiberglass mesh cloth to lay on both sides of the composite insulation formwork to improve its impact resistance, bending load and other mechanical strength.
Production process and equipment
Preparation process of combined thermal insulation formwork
Preparation of compound cement dry powder mortar, cementitious materials, aggregate rubber powder and other raw materials are measured, mixed and stored.
Measure, mix and store raw materials such as vitrified microsphere rubber powder and other raw materials for preparing cementitious materials from warm mortar dry powder.
The preparation process of the thermal insulation formwork mainly includes cutting the extruded board, creating grooves, spraying the interface agent, laying the bonding reinforcement layer on the inside of the insulation, curing, and laying the bonding layer reinforcement and insulation transition layer on the outside of the insulation board. The outer bonding reinforcement layer ensures natural maintenance before leaving the factory.
Composite thermal insulation formwork production equipment
Composite thermal insulation formwork molding equipment is mainly composed of electronic metering device, dry powder mortar mixer, slurry mixer, work lift, smoothing device, transmission equipment and cutting machine. Dry mortar mixer The slurry mixer adopts automatic batching and electronic metering, with a high degree of automation and accurate metering. The molding equipment has the characteristics of reasonable structural design, convenient production and operation, short molding cycle, high production efficiency, high product quality, etc.
Every customer who purchases Xinze board equipment is entitled to free door-to-door maintenance services within three years, and the quality is subject to the national three guarantees. Welcome to visit and inspect, the consultation hotline is Manager Xie’s address: Shiji Development Zone, Ningjin County, Dezhou City, Shandong Province
Construction formwork equipment board