Butterfly buckle

Butterfly buckle | Butterfly buckle price | Construction butterfly card | Butterfly buckle wholesale | Butterfly buckle manufacturer
Butterfly buckle, butterfly buckle price, construction butterfly card, butterfly buckle wholesale, butterfly buckle manufacturer
Butterfly card Butterfly buckle is a new type of construction equipment, which is an ideal tool for locking and anchoring formwork tie rods. It uses the resistance generated when the wedge-shaped latch of the clamp clamps the tie rod to anchor the tie rod, and works reliably. Compared with traditional threaded tie rods, it not only replaces the function of nuts and gaskets, but also changes the operation mode of traditional formwork tie rods, effectively controls the size of the formwork, improves the smoothness of the surface of concrete components, and uses flat buckles and butterfly buckles. There is no need to process the tie rod, which saves thread processing costs. The material of the tie rod is widely optional. Steel rods and threaded steel bars can be used as long as they can pass through the clamp. The length of the tie rod is not limited, as long as it is long enough. The construction operation is very convenient and fast, saving nearly more labor than threaded tie rods, and can be used repeatedly, with long life and low maintenance costs!
Butterfly Card Butterfly buckle is suitable for diameter steel pipes as purlins and is an alternative to mountain-shaped clamps.
Features: Easy to operate, fast loading and unloading, which can reduce workers' labor intensity and speed up the project progress by 50%. It is durable and can be used repeatedly without maintenance, reducing construction costs. Stable load and high safety.
Applicable range: Energy-saving use of diameter round steel and steel bars.
Tensile strength comparison table
Specifications Failure load safety factor Safety load
Line
Line
Description
Ensure the dimensional accuracy and surface smoothness of concrete components
br/>, before wedge-tightening the bolt, the template must be tightened with a special tool tightener as shown on the right.
Based on the actual engineering conditions, the structural engineer needs to calculate the total pressure and quantity used, so that the pressure endured by each unit does not exceed the safe load in the above table.
To prevent cement slurry and other debris from splashing when tightening the bolt with a hammer, you must wear a safety shield to protect your eyes during operation.
Contact number