Year1
- 类型：
- 循环水湿膜加湿器
- 型号：
- AKSX
- 加湿量：
- 30kg
< r#>1. The working principle of the circulating wet film humidifier:
< r#> Humidification using wet film materials belongs to equal-enthalpy clean humidification. The working process is that clean tap water passes through the water inlet pipe. The water enters the circulating water tank, and the water level is controlled by the float valve. When the humidifier is working, the circulating water pump transports the water in the water tank to the sprinkler on the top of the humidifier. The sprinkler ensures that the water is evenly distributed to the wet film material, and the water flows from the wet film to the wet film material. The top of the membrane material penetrates downward and is absorbed by the wet membrane material at the same time, forming a uniform water film. When the dry air passes through the humidifier, part of the water vaporizes and evaporates in contact with the air, making the air moist (that is, the humidity increases) to achieve the purpose of humidification. The water that has not evaporated flows back to the circulating water tank from the lower part of the humidifier, and the water in the circulating water tank passes through the circulation The water pump is recycled repeatedly.
When the water level in the circulating water tank drops, the water inlet switch is turned on to replenish the water tank to ensure that the water level in the water tank is maintained within the set height range. When the water level in the circulating water tank drops to a certain height, the water in the water tank The low water level sensor works to ensure that the circulating water pump stops running in case of water shortage. When the water in the circulating water tank circulates for a certain period of time, the water is discharged through the drain port of the water tank, the water tank is cleaned, and clean water is replaced to ensure that the circulating water and humidified air are not polluted again.
< r#> Actual picture of the wet film humidifier supporting the air conditioner:
< Sanmei Humidifier (). >
<: r#>< r#> 2. Circulating wet film humidification Technical features of the humidifier:
The frame and circulating water tank of the humidifier system are made of stainless steel.
The water source is controlled by a switch, and the water level in the water tank is controlled by a float valve, with automatic water replenishment function.
The circulating humidifier system is equipped with a bypass device (filter and flow regulating valve, etc.).
The wet film humidifier system can accept the humidity control signal from the central control system to realize automatic humidity control. The humidifier system itself can also realize automatic humidity control independently.
The wet film humidifier system has a protection device to prevent the circulating water pump from working without water.
The circulating water tank has overflow and drainage channels.
< r#>3. Advantages of humidification materials for the host system: Humidification using a wet film is equal-enthalpy clean humidification, and no white powder is produced. , Its humidification ability can be self-adjusted and will not cause oversaturation or condensation. , Wet film humidification distance is short, and it is used in central air conditioning, which can save the unit volume and reduce the unit cost. , has the dual functions of humidification and cooling, good mechanical strength and water immersion straightness. , consume less energy during installation and operation, and have low operating costs. , No noise during the humidification process, high structural strength, corrosion resistance, acid and alkali resistance, and long service life. , has good water-blocking effect and can replace the air-conditioning water-blocking board. , modular configuration, which can be arbitrarily combined according to the cross-sectional size of the air conditioner. 2. Water saving and energy saving: The water in the humidifier can be recycled, and the water saving effect is good. The entire system has no energy-consuming parts except the circulating water pump.
< r#>
4. Selection of circulating dripping infiltration wet film humidifier system:
1. Selection of humidifier host
Install a wet film with a thickness of For the air conditioning unit of the humidifier, an empty section is reserved at the rear of the surface cooler, and the length of the empty section should be as large as (+).
For air-conditioning units equipped with a wet film humidifier with a thickness of 100 mm, there must be a water tray at the bottom of the installed humidifier, and space for the humidifier must be reserved in the water tray.
The wet film humidifier should be installed vertically, with the left and right tilt angle not exceeding 10 degrees.
. A water supply pipe and a three-core power socket must be provided on site. Both the water source and the power supply must be led within . meters from the installation location of the humidifier electric control box, and there must be no obstacles around it.
2. Selection of the width and height of the wet film host and the width and height of the circulating water tank
Assuming that the circulating water wet film humidifier system is installed on the air conditioner surface cooler: (width) heat exchanger width, (height) Height inside the air conditioner box.
, General conditions (wet film height) Height inside the air conditioning box.
, selection of circulating water tank width { wet film thickness + when the total air volume is less than)
wet film thickness + when the total air volume is between ~)㎡
wet film thickness + when the total air volume is greater than)< br/>, the selection of circulating water tank height {When the total air volume is less than)
When the total air volume is between ~)
When the total air volume is greater than)
WhatsApp
