Year1
< rb br > : >
< rb br >: >Product Features
: ><:><:>
< rb br > : >
: >, It has the properties of impermeability, frost resistance, salt resistance, alkali resistance, weak acid corrosion resistance, and has strong bonding force with a variety of materials. ><:><:>
< rb br > : >
: >. It can be applied on the surface of wet substrate without drying. It can be hardened in humid environment or underwater. ><:><:>
< rb br > : >
: >. It is easy to operate and construct, similar to ordinary cement mortar construction, and easy to clean with water. ><:><:>
< rb br >: >Product Usage
: ><:><:>
< rb br > : >
: >, used for Anti-impact wear, anti-cavitation and anti-freezing and thawing protection of the flow surface of hydraulic structures, as well as repair after damage. ><:><:>
< rb br > : >
: >, used for defect repair, reinforcement and strengthening of concrete buildings. ><:><:>
< rb br > : >
: >, used for the protection and repair of concrete or metal components against acid, alkali and salt corrosion in chemical, petroleum, factories, docks and other industries. ><:><:>
< rb br > : >
: >, used for anti-wear protection and repair of engineering parts such as highways, bridges, airport runways, workshops, etc. ><:><:>
< rb br > : >
: >, used for pasting acid-resistant bricks. ><:><:>
< rb br >: >Construction technology
: ><:><:>
< rb br >: >1. Base surface treatment: ><: ><:>
< rb br >: >Treat the surface of the concrete base, remove the milk skin, cement slurry surface or loose particles on the base surface to expose the solid base layer, and remove surface sand and dust , grease, etc. ><:><:>
< rb br >: >2. Material preparation: ><:><:>
< rb br > : >
: >. Check the outer packaging of the product , specifications, models, and production dates to ensure that the products are within the shelf life specified by the manufacturer. ><:><:>
< rb br > : >
: >. Open the lid of the packaging barrel and check the contents >
materials, >B
materials, >
The materials are not damaged, leaked or agglomerated due to moisture. The assembly ratio in each barrel is >
Materials: >B
Materials: >
Materials>
: >< br/>: >
. ><:><:>
< rb br > : >
: >When mixing ingredients, first mix >
ingredients and >B
ingredients according to >
: >
Pour the mixture into the bucket and mix evenly, then slowly add the >
ingredients while stirring until it becomes a uniform clay. ><:><:>
< rb br >: >3. Construction instructions: ><:><:>
< rb br > : >
: >According to project construction requirements , use a spatula to apply the prepared clay to the repaired area. When applying, compact and polish at the same time. It can be put into use >
~ >
days after completion. ><:><:>
< rb br > : >
: >. The reference dosage is about >
. ><:><:>
< rb br >: >Notes
: ><:><:>
< rb br > : >
: >, Prepare well The glue should be used up within >
<:><:>
< rb br > : >
: >, >
material and >B
material will appear slight delamination after being stored for a long time. Shake well before use. ><:><:>
< rb br >: >Packaging, storage and transportation
: ><:><:>
< rb br > : >
: >, Standard Packaging specifications are: >
>.
Barrel, non-flammable and non-explosive, can be transported as general cargo. ><:><:>
< rb br > : >
: >. This product should be stored in a dry, cool place, and the storage period is >
months. ><:><:>
< r> :>
WhatsApp
