Year1
- 网孔：
- 5*5mm
- 尺寸：
- 1*50米
) Wall reinforcement materials (such as fiberglass wall mesh, wall panels, interior and exterior wall insulation boards, gypsum boards, etc.
) Reinforced cement products (such as Roman columns , flue, etc.).
) Granite, mosaic special mesh, marble back-mesh.
) Waterproof membrane cloth, asphalt roof waterproofing.
) Reinforced skeleton materials for plastic and rubber products.
) Fireproof board.
) Grinding wheel base cloth.
) Geogrids for highway pavements.
) Caulking tape for construction, etc.
: >Interior wall products
Product reinforced mesh cloth is made of glass fiber woven fabric as the base material and treated with polymer alkali-resistant emulsion. This product has high strength, good alkali resistance and long-lasting Resisting the decay of alkaline substances, it is an ideal reinforcing material for cement concrete products, wall panels and components.
General specifications:
Mesh size:
Width: cm cm
Weight per square meter: grams
Length of each roll: meters or meters
Color White (standard) yellow green or other colors.
Packaging: can be packaged according to customer requirements.
Special specifications and hardness can be customized according to customer requirements.
Glass fiber self-adhesive tape
Uses: Repair dryboard walls, gypsum board joints, cracks in various walls and other wall damage
Main properties: Excellent alkali resistance, durable Durable: high tensile strength and deformation resistance, anti-cracking: no deterioration, no foaming: excellent self-adhesiveness,
No need for pre-priming, quick to use and easy to construct.
Specifications: mesh inches grams square meters.
Width in millimeters: Length in meters.
Color: Usually white.
Construction method:
． Keep walls clean and dry.
． Apply tape to the cracks and press firmly.
． Make sure the gap is covered with tape, then use a knife to cut off the excess tape, and finally apply mortar.
． Let it dry naturally, then sand lightly.
． Fill in enough paint to make the surface smooth.
． Cut off any leaking tape. Then, note that all cracks have been properly repaired, and use a fine composite material to modify the surrounding areas to make them smooth and new.
: >Alkali-resistant products
Mesh cloth is based on medium-alkali or alkali-free glass fiber woven fabric and treated with alkali-resistant coating. This product has high strength and good alkali resistance. It plays an important structural role in the insulation system and mainly prevents the occurrence of cracks. Due to its excellent resistance to acid, alkali and other chemical substances and its high longitudinal and latitudinal tensile strength, it can evenly disperse the stress on the exterior wall insulation system and avoid damage to the entire insulation caused by collision and extrusion due to external impact. The deformation of the structure makes the insulation layer have high impact strength, easy construction and quality control, and plays the role of soft steel bars in the insulation system.
: >Current Standard
National Current Exterior Wall Exterior Insulation technical standards (): The alkali-resistant tensile breaking strength of the glass fiber mesh in the warp and weft directions shall not be less than that, and the alkali-resistant tensile breaking strength retention rate shall not be less than %, weight grams per square meter. The alkali-resistant tensile breaking strength of the glass fiber mesh in the warp and weft directions is less than 0.0%, and the alkali-resistant tensile breaking strength retention rate shall not be less than %, weight grams per square meter.
Common specifications:
,,
,,,,
,, ,
,,,
,
WhatsApp
