Year1
- 型号：
- VK-T25F
- 粒径nm：
- 20-30
- 含量%：
- 99.9
< >Nano titanium oxide () for textile sizing is used in textile sizing. Through the perfect combination with starch, it improves the overall weaving performance of the yarn and reduces the amount of slurry boiled. The time is short, which reduces the cost of sizing, improves sizing efficiency, and also solves many problems such as difficulty in desizing and environmental pollution.
Textile sizing uses nano-titanium oxide () mainly as a substitute in the yarn to conform to the hairiness, fill gaps, reduce warp breakage, and lubricate.
< >Technical indicators:
< > < >Item
< < >Indicators
< > < >Model
< < >
< > < >Appearance
< < >White fluffy powder
< > < >Surface properties
< < >Hydrophilic
< > < > Value
< < >
< > < >Crystal Form
< < >Rutile
< > < > Average primary particle size,
< < >
< > < >Specific surface area,
< < >
< > < >Content before treatment %
< < >.
< > < >Surface treatment agent
< < >% (
Nano treatment for textiles
)
< > < > Weight loss on drying ℃, (%)
< < >.
< > < > Weight loss on ignition (%)
< < >.< br/>
< >
< > Product application:
< > Nano titanium oxide () for textile sizing is used in textile sizing procedures:
< >. The original viscosity should be maintained during the pulping process.
< >, the parameters of the sizing machine remain stable.
< >, first disperse the textile slurry into % liquid () using nano titanium oxide ().
< >. Dosage of nano-titanium oxide powder for textile sizing: based on starch weight.
< >(The weight of starch here is the original amount of starch + the amount of substituted starch).
< >In the pure cotton sizing, replace it with the same amount of starch, and keep the other components unchanged.
< >When mixing the slurry, add the specified amount of water to the mixing barrel, and then shake the liquid () slurry additive.
< >Add the specified amount of starch and stir at medium speed for ten minutes before adding other raw materials.
< >, raise the temperature and cook the slurry, and simmer it for minutes under normal pressure or simmer under high pressure for minutes.
< >Remarks: Count yarn
Liquid () kg per barrel of slurry,
< >
Count yarn
Liquid () kg per barrel of slurry,
/> < > Count yarn
Keep kilograms, replace the rest with the same amount of starch, and use liquid ().kg.
< >If there is liquid polyacrylate slurry in the slurry formula, this nano-additive should be added after the slurry is heated to ℃.
< >Adding amount:
kg slurry + kg liquid
Packing:
kg barrel
WhatsApp
