SL170 cross slide coupling has the lowest price in Xinda

Cross slider coupling, also known as metal slider coupling, consists of two half couplings with radial grooves on the end faces and an intermediate slider with convex tenons at both ends. The tenons are perpendicular to each other and are embedded in the grooves of the two half couplings to form a moving pair. If the measuring axis is not concentric or skewed, the slider will slide in the groove during movement, so the relationship between the groove and the slider Lubricant must be added to the working surface. If the two shafts are not concentric and the speed is high, the eccentricity of the slider will produce great centrifugal force wear and bring additional load to the shaft and shaft. Therefore, it is only suitable for low speed and transmission loads. big occasion. The material of this coupling part can be steel, and the working surface needs to be heat treated to improve its hardness. Steel can also be used without heat treatment when the requirements are lower. In order to reduce friction and wear, oil should be injected from the oil hole of the middle plate for lubrication during use.
Basic performance parameters and main dimensions of type cross slide coupling (unit:)
< r> Model
< r> Nominal torque

()
< r> Allowable speed

[]r
< r> Shaft hole diameter

< r>
< r >
< r>
< r>
< r>
< r> Moment of inertia

(.㎡)
< r> Weight

()

< r>
< r>
< r>
< r> ~
< r >
< r>
< r>
< r>
< r r> .
< r> .
< r> .

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r> .
< r> .

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r> .
< r> .

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r> .
< r>

< r>
< r>
< r >
< r> ~
< r>
< r>
< r>
< r>
< r> .
< r> .

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r> .
< r> .

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r> .< br/> < r> .

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r r> .
< r> .
< r>

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r> .
< r> .

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r>
< r>

< r>
< r>
< r>
< r> ~
< r>
< r>
< r>
< r>
< r>
< r> .

< r>
< r>
< r>
< r > ~
< r>
< r>
< r>
< r>
< r> .
< r>
< br/>