3m630 anti-slip sticker

yellow, anti-slip sticker, anti-slip tape, anti-slip adhesive paper Product description:
Structural diagram of safety anti-slip sticker
Safety anti-slip sticker model and applicable places
General flat type: base material, mineral sand surface, black ,, transparent, yellow
Suitable for: marble steps, building stairs, ramps, boat decks, transportation hubs
Concave-convex flat type: aluminum foil substrate is suitable for concave and convex surfaces, mineral sand surfaces, black, yellow
Suitable for: printed steel plate steps, treads, heavy equipment and machinery
Medium sand comfort type: special surface treatment rubber, gray, black
Suitable for: indoor stairs and passages, entertainment and sports facilities
Small size sand surface comfort type: vinyl surface, transparent, white
Suitable for: bathroom, bathtub, poolside, boat, ski wakeboard, etc.
Precautions for use:
Surface clean, Dry, flat
Suitable temperature
Avoid joints of floor tiles
Avoid long-term contact with water vapor
Precautions for first laying:
Confirm that the temperature is suitable (not too cold or too hot) (Glue curing)
The surface should be thoroughly clean and completely dry, which will affect whether the adhesive tape can be used stably for a long time
Do not touch the adhesive with your hands to avoid affecting the glue properties
It is recommended to use a rubber wheel. Press with a rubber hammer to apply a certain amount of pressure, which is beneficial to the curing of the glue
Let it dry for more than 10 minutes, and do not move the tape within an hour
Also: If you find that the laying position is wrong, you can quickly tear it off and re-attach it