BD501A type self-aligning machine for sale in stock, special offer

< Type B self-aligning machine for sale in stock, detailed description in the special offer:
< >
B B
The self-aligning machine uses the self-aligning step feature to turn the corner into an AC An inductive micromotor that converts voltage or AC voltage into rotation angle is used as a displacement sensor for measuring angle in servo systems. The self-aligning machine can also be used to realize long-distance transmission, transformation, reception and indication of angle signals. Two or more motors are connected through a circuit, so that two or more rotating shafts that are not connected to each other can automatically maintain the same rotation angle change, or rotate synchronously. This performance of the motor is called self-stepping characteristic. In the servo system, the self-aligning machine used by the side that generates the signal is called the transmitter, and the self-aligning machine used by the side that receives the signal is called the receiver. Self-aligning machines are widely used in position and orientation synchronization indicating systems such as metallurgy and navigation, and in servo systems such as artillery and radar.
< >This type of non-contact self-aligning machine is an inductive electromechanical component. Usually two or more are used in combination in the system. Mainly used for long-distance transmission, reception and conversion of angles. In synchronous transmission, follow-up systems and resolution devices, the purpose of automatically indicating angle, position, distance and instructions is achieved by transmitting angular displacement through the electrical connection between the transmitter and the receiver.
< >Structural features: This type of self-aligning machine has two sets of windings, one set of three-phase synchronous winding and one set of single-phase excitation winding. The self-aligning machine consists of a casing with a longitudinal iron core, a stator embedded with three-phase synchronous windings, an excitation winding, a magnetic ring, a rotor with ball bearings and an end cover. This type of self-aligning machine has a closed structure. When it is used as a receiver, it has a special damping device, which is a mechanical damper installed on the shaft. Compared with the contact type self-aligning machine, this type of non-contact self-aligning machine is characterized by no sliding contact, so it operates safely and reliably and has a long life. It can be used in environments lacking maintenance and in any system subject to bumps and vibrations. More reliable.
< > Conditions of use:
. Altitude does not exceed
. Ambient air temperature ~ +℃ (humidity is % ~ %)
. Relative humidity: %% (air temperature is ℃ )
.Vibration
Model description: B represents non-contact double amplitude..., frequency
.Impact: acceleration, frequency sub-division.
Self-aligning transmitter B
Indicates non-contact self-adjusting receiver B
Indicates non-contact self-adjusting transformer (used as a receiver when the transformer is working).
The distance between the letters after the model number is:
. Normal secondary voltage level, used for medium-distance systems with transmission distances of hundreds of meters
B. High secondary voltage level, used for transmission distances of several kilometers long distance system.
Features of B and B series non-contact self-aligning machines: non-contact, no sliding contact of brushes and slip rings, reliable operation, anti-vibration, adaptable to harsh environments, working temperature ℃ ~ ℃ product series
B , B
Size: , B, B
Size: , B, B
Size:
Control motor
* B, B series non-contact self-aligning machine
Model Excitation Voltage Frequency Excitation Current Secondary Voltage Description
B. Safe and reliable work, very suitable in harsh environments such as bumps and vibrations.
![ !rBr]